(2022) PASS NS0-593 Exam Free Practice Test with 100% Accurate Answers
NS0-593 dumps Free Test Engine Verified By It Certified Experts
NetApp NS0-593 Exam Certification Details:
| Exam Code | NS0-593 NCSE ONTAP |
| Number of Questions | 60 |
| Exam Registration | PEARSON VUE |
| Exam Name | Support Engineer ONTAP Specialist |
| Recommended Training | ONTAP Troubleshooting (ILT) |
| Duration | 120 minutes |
| Exam Price | $150 USD |
| Passing Score | 62% |
NetApp NS0-593 Exam Topics:
| Section | Objectives |
|---|---|
| Performance | - Describe ONTAP performance concepts - Demonstrate knowledge of troubleshooting ONTAP performance |
| Software-defined ONTAP Solutions | - Describe software-defined ONTAP solutions |
| Hardware | - Demonstrate knowledge of hardware troubleshooting - Demonstrate knowledge of troubleshooting SP or BMC - Describe the hardware components in a Fibre Channel environment - Demonstrate knowledge of the cluster interconnect infrastructure - Describe MetroCluster configurations |
NEW QUESTION 15
You have a 4-node NetApp ONTAP 9.8 cluster with an AFF A400 HA pair and a FAS8300 HA pair with 16
TB NL-SAS drives. You are asked to automatically tier 150 TB of Snapshot copy data from the AFF A400
aggregates to the FAS8300.
In this scenario, which ONTAP license must be added to the cluster to accomplish this task?
- A. FabricPool license
- B. TPM license
- C. VE license
- D. S3 license
Answer: B
NEW QUESTION 16
An administrator receives the following error message:
What are two causes for this error? (Choose two.)
- A. A disk is falling.
- B. There Is excessive SSD load causing the wear leveling to become unbalanced.
- C. An SSD disk is performing garbage collection to create a dense data layout.
- D. There is excessive SATA HDD load.
Answer: B,D
NEW QUESTION 17
When an administrator tries to create a share for an existing volume named voll, the process fails with an error.
Referring to the exhibit, what Is the reason for the error?
- A. The CIFS service is not authenticating properly with the domain controller.
- B. The volume must have a type of DP.
- C. The volume has not beenmounted.
- D. The CIFS service is not in workgroup mode.
Answer: C
NEW QUESTION 18
Which two throughput elements are controlled by host applications? (Choose two.)
- A. operation size
- B. latency
- C. concurrency
- D. Jitter
Answer: B,D
NEW QUESTION 19
Your customer Informs you about SnapMlrror problems after upgrading NetApp ONTAP software to a newer
version. After investigating the event logs and the SnapMirror history, you see information about delayed
updates of the SnapMirror relationships.
How would your customer prevent such problems in the future?
- A. Modify the schedules of the SnapMirror relationships after upgrading the ONTAP software.
- B. Delete the SnapMirror relationships and create them new after upgrading the ONTAP software.
- C. Verify that the cabling of the hardware port that Is responsible for SnapMirror transfers Is correct.
- D. Quiesce the SnapMirror relationships before upgrading the ONTAP software.
Answer: C
NEW QUESTION 20
You notice poor performance on your FlexGroup and execute the system node run -node * flexgroup show
command for more Information. You notice the "Urge" column has non-zero values.
In this scenario, which statement is true?
- A. The constituent volumes are out ofInodes.
- B. The data placement is uneven.
- C. The aggregate is completely full.
- D. The constituent volumes are completely full.
Answer: C
NEW QUESTION 21
Your customer has deployed a two petabyte NetAppONTAP FlexGroup volume across their 4-node ONIAP
9.8 cluster. They plan to store over three billion files. They want to prevent file 10 conflicts since files are
placed into the FlexGroup volume.
In this scenario, which two NFS SVM parameters should be enabled? (Choose two.)
- A. -v3-64bit-identifiers
- B. -v4-fsid-change
- C. -v3-fsid-change
- D. -v4-64bit-idantifiers
Answer: A,C
NEW QUESTION 22
You are optimizing your Cloud Volumes ONTAP. For interoperability and consolidation purposes, you need
to know the storagelimits.
In this scenario, which source should be reviewed?
- A. NetApp Cloud Volumes ONTAP Release Notes
- B. Cloud Central
- C. Hardware Universe
- D. Interoperability Matrix Tool (IMT)
Answer: A
NEW QUESTION 23
A customer reports that some of their client computers are unable to access a FlexGroup over CIFS. This
problem involves only their older Windows XP clients and some printers and scanners.
In this scenario, which statement Is correct?
- A. These systems use the SMQI protocol which Is an unsupported feature in FlexGroup
- B. FlexGroup requires CIFS shares to use the Continuously Available Feature, which these clients do not
support. - C. FlexGroup requires CIFS shares to be located in qtrees, which these clients do not support.
- D. These systems use Offloaded Data Transfer, which is an unsupported feature in FlexGroup.
Answer: B
NEW QUESTION 24
Your customer installed the shelf firmware for their NS224 shelf over a week ago, and the firmware has
notupgraded on shelf 1 module B. The customer wants to know what the next steps would be to get the
firmware upgraded after verifying that the shelf firmware is indeed loaded onto the system.
Which step would you perform to complete the firmware upgrade?
- A. Power cycle the shelf.
- B. Reseat the PSU of the shelf.
- C. Reseat the NSM100 module.
- D. Reseat the disk in Bay 0.
Answer: A
NEW QUESTION 25
A system panic due to an "L2 watchdog timeout hard reset" error occurred. You have found a FIFO message
in the SP log.
Which FIFO message Is useful for Investigating this Issue?
- A. BIOS exit BBSP:C=2F L=20 FIFO: 2 C8 C9 C4 24 4 6 18 7 8 11
- B. before NMI BBSP:C=00 L=00 FIFO: F3 F2 F1 F0 5 B2 0 0 0 80 20 E F E3 C0 C2 3 4 6 7 9 9 A
- C. ONTAP Shutdown BBSP:C=00 L=2F FIFO:
- D. before Reset BBSP:C=00 L=00 FIFO:
Answer: A
NEW QUESTION 26
You have connection Issues from a Linux host to an AFF A400 FC LUN. You are asked by support to run the
NetApp sanlun command to provide troubleshooting information.
Which NetApp software package must be installed on the host?
- A. Host Utilities package
- B. Inventory Collect Tool
- C. Virtual Storage Console
- D. SnapDrive for UNIX
Answer: A
NEW QUESTION 27
Your customer complains about missing volume snapshot copies on a SnapMlrror destination. While
investigating this case, you notice an executed SnapMirror resync operation in the event logs of the system.
In this scenario, what Is the cause of this problem?
- A. Snapshot copies were manually removed from the destination after the resync.
- B. Newer Snapshot copies than the common snapshot that was chosen for resync were removed
automatically at the destination. - C. NetApp ON TAP System Manager removed these snapshot copies due to a snapshot schedule.
- D. The autodelete option removed Snapshot copies before the resync.
Answer: A
NEW QUESTION 28
A customer is calling you to troubleshoot why users are unable to connect to their CIFS SVM.
Referring to the Information shown in the exhibit, what Is the source of the problem?
- A. The broken disk in Node03 is the source of the problem.
- B. Thev1db database is offline.
- C. The databases On Node03 must be Switched from secondary to master.
- D. The aggregate aggr2 has a failed disk.
Answer: C
NEW QUESTION 29
A customer with an FC MetroClusterconfiguration that is running NetApp ONTAP 9.8 software experienced a
site outage and wants to know why the MetroClusler configuration did not switch over to the other site.
What are two reasons for this problem? (Choose two.)
- A. There was a failed PSU inthe switchover site.
- B. The ISLs were down between the sites.
- C. An ISL link was not operating at 16Gbps.
- D. The site had unmirrored aggregates.
Answer: A,D
NEW QUESTION 30
A 2-node cluster hosts only NAS data UFs. Allnodes lose access to the cluster network.
Referring to the exhibit, which statement is correct?
- A. No takeover event will occur and NAS data UFs will not be accessible.
- B. NAS data UFs are accessible on only the node that has Epsilon.
- C. Both nodes race to takeover the other, one node will takeover the other node.
- D. All nodes in the cluster reset and NAS data UFs are not accessible after reboot.
Answer: D
NEW QUESTION 31
A user reports that a colleague saved a file called Test.txt from a UNIX system to a multiprotocol volume.
When opening the file later from a Windows system, it was not the file that they wanted. The file that they
wanted was named TEST~1.TXT.
Which statement explains this behavior?
- A. UNIX name mapping updated the filename.
- B. A Snapshot copy preserved two versions of the file.
- C. Case Insensitivity of SMB clients caused the file to be displayed with a different name.
- D. Windows Volume Shadow Copy Service stored an older version of the file.
Answer: B
NEW QUESTION 32
You have a customer who is concerned with high CPU and disk utilization on their SnapMirror destination
system. They are worried about high CPU and disk usage without any user operations.
In this situation, what should you tell the customer?
- A. Explain that only user workload should use the CPU and Investigate further.
- B. Suggest that the customer manually cancel any scanners on the destination to reduce CPU usage.
- C. Explain that background tasks such as SnapMirror throttle up in the absence of user workload.
- D. Suggest that the customer throttle their SnapMirror relationships to reduce resource consumption.
Answer: B
NEW QUESTION 33
Your customer has mounted an NFS SVM from a Linux client unci performance is very poor. The customer is
certain that they have jumbo frames enabled. They have verified an MTU of 9000 on both the Linux client and
the broadcast domain on the NetApp ONTAP 9.8 cluster.
Referring to the exhibit, which ONTAP command will help isolate a possible MTU mismatch?
- A.
- B.
- C.
- D.
Answer: C
NEW QUESTION 34
You ate connecting a Windows Server 2019 hostto ISCSI LUNs on a 4-node AFF A250 cluster running
NetApp ONIAP 9.8 software. The host is unable to connect to the target interface, and the ONTAP event log
has the message shown below.
ISCSI: network interface identifier disabled for use; incoming connection discarded
In this scenario, what is the cause of this connection issue?
- A. CHAP isnot configured correctly for the specified initiator.
- B. The iSCSI service is not enabled on the interface.
- C. The WWPN was not added to the initiator group.
- D. iSNS is not enabled on the storage virtual machine.
Answer: C
NEW QUESTION 35
......
Latest Network Appliance NS0-593 Practice Test Questions: https://www.itpass4sure.com/NS0-593-practice-exam.html
Realistic NS0-593 Accurate & Verified Answers As Experienced in the Actual Test!: https://drive.google.com/open?id=1RCBPVSuob748yE2Gn74qcW0z1yRyefDE
