Pass Network Appliance NS0-183 Exam Quickly With itPass4sure
Prepare NS0-183 Question Answers - NS0-183 Exam Dumps
NetApp NS0-183 Exam Certification Details:
| Exam Code | NS0-183 NCSIE |
| Recommended Training | ONTAP Clustered Installation Workshop (ILT) ONTAP Cluster Administration (vILT/ILT) Universal FAS Installation (WBT) Introduction to NetApp Installation Standard (WBT) |
| Exam Registration | PEARSON VUE |
| Duration | 90 minutes |
| Exam Price | $150 USD |
| Sample Questions | NetApp NS0-183 Sample Questions |
| Passing Score | 67% |
| Number of Questions | 60 |
| Exam Name | Storage Installation Engineer ONTAP |
NEW QUESTION 11
Which statement about LIFs is true?
- A. One port can host multiple data LIFs.
- B. A data LIF can be associated with multiple SVMs.
- C. One cluster-management LIF exists per node.
- D. Cluster LIFs and data LIFs can share a port.
Answer: A
NEW QUESTION 12
After setting up a new cluster, you run an AutoSupport message for a test.
Which two commands would you use to proof the functionality and settings of AutoSupport? (Choose two.)
- A. system node autosupport option show
- B. system node autosupport show history
- C. system node autosupport history show
- D. system node autosupport show
Answer: C,D
NEW QUESTION 13
You just installed a new AFF A220 2-node cluster without additional disk shelves. When you review the Config Advisor output, you notice that your SAS cabling appears to be single-path HA.
In this scenario, which statement is true?
- A. The Config Advisor version you are using requires a plugin for AFF controllers.
- B. Cable controller 1 0a to controller 2 0a, and cable controller 1 0b to controller 2 0b.
- C. Cable controller 1 0a to controller 2 0b, and cable controller 1 0b to controller 2 0a.
- D. AFF A220 controllers with internal disks support only single-path HA.
Answer: C
NEW QUESTION 14
A 4-node cluster has connectivity for both block and file access. Nodes 1 and 3 are used for file access, and nodes 2 and 4 are used for block access. During routine maintenance, node 4 is switched off and the LIFs are migrated to other nodes. Upon investigation, you see that the LIFs that serve file traffic have moved to alternative ports.
However, LIFs that serve the block have not migrated. In this scenario, what is happening?
- A. The failover group is configured incorrectly.
- B. The fiber switch is configured incorrectly.
- C. The LIFs that serve the block protocol do not failover.
- D. There is a faulty SFP.
Answer: C
NEW QUESTION 15
Which two configurations use root-data-data partitioning? (Choose two.)
- A. AFF A220 with 3.8 TB internal SSD drives
- B. AFF A800 with 3.8 TB internal NVMe SSD drives
- C. FAS8080 with 1.8 TB external SAS drives
- D. FAS2650 with 1.8 TB internal SAS drives
Answer: A,B
NEW QUESTION 16
What should you do to change the data protocol of a LIF?
- A. Put the LIF in another broadcast domain.
- B. Delete and re-recreate the LIF.
- C. Add the new data protocol to the LIF.
- D. Shut down the assigned port.
Answer: B
NEW QUESTION 17
You are installing a new AFF A400 cluster for a customer. The customer indicates that they want to take advantage of AutoSupport On Demand.
In this scenario, which AutoSupport transport protocol must you use?
- A. HTTPS
- B. HTTP
- C. SMTP
- D. FTP
Answer: A
NEW QUESTION 18
Click the Exhibit button.
Referring to the exhibit, what information is forwarded to syslog after you enter the scripted install commands? (Choose two.)
- A. AutoSupport messages
- B. command history
- C. SNMP traps
- D. EMS messages
Answer: A,B
NEW QUESTION 19
You were asked to install a FAS9000 with two quad-port SAS PCI cards. The SAS PCI cards are installed in slot 9 and slot 1. In preparation for the installation, you are filling out the SAS cabling worksheet. In this scenario, which ports are used for the second stack?
- A. 9b/1b
- B. 9a/1d
- C. 9a/1a
- D. 9c/1a
Answer: B
NEW QUESTION 20
Which three components are required when setting up a new ONTAP cluster? (Choose three.)
- A. Advanced Drive Partitioning
- B. password
- C. node management IP
- D. cluster management IP
- E. intercluster IP
Answer: C,D,E
NEW QUESTION 21
You have a 6-node ONTAP 9.1 cluster with two FAS6290 nodes and four FAS8080 EX nodes using a SAN protocol.
In this scenario, how many FAS9000 HA pairs would be joined to this cluster?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 22
Click the Exhibit button.
Referring to the exhibit, what information is forwarded to syslog after you enter the scripted install commands? (Choose two.)
- A. AutoSupport messages
- B. command history
- C. SNMP traps
- D. EMS messages
Answer: A,B
Explanation:
Explanation/Reference: https://www.netapp.com/media/10674-tr4569.pdf
NEW QUESTION 23
Your customer wants to buy four new DS212C shelves with an 8 TB SATA drive. The customer also wants to know the usable aggregate size of this configuration.
In this scenario, which resource would you use to accomplish this task?
- A. Config Advisor
- B. Fusion
- C. Interoperability Matrix Tool (IMT)
- D. Hardware Universe (HWU)
Answer: B
NEW QUESTION 24
Which statement describes an SVM?
- A. An SVM is a logical device that shares data.
- B. An SVM is a node in the cluster.
- C. An SVM is a logical network interface.
- D. An SVM is a storage volume type.
Answer: A
NEW QUESTION 25
Click the Exhibit button.
A customer has a 2-node FAS8200 cluster with four DS212C shelves with 10 TB SATA drives.
Referring to the exhibit, an aggregate will be created with which default RAID type?
- A. RAID4
- B. RAID1
- C. RAID_DP
- D. RAID_TEC
Answer: D
NEW QUESTION 26
While preparing for a new cluster installation, your customer indicates that they have some disk shelves and switches that were discontinued at their old site. They want to re-use as much of this equipment as possible. You must verify that their discontinued equipment is compatible with the new equipment they have on order.
Which two actions will accomplish this task? (Choose two.)
- A. Use the Hardware Universe portal (HWU).
- B. Verify compatibility from Activity IQ.
- C. Run the Cluster Configuration Builder tool (ConfigBuilder).
- D. look up the compatibility in the Interoperability Matrix Tool (IMT).
Answer: A,D
NEW QUESTION 27
What are two reason why automatic giveback fails? (Choose two.)
- A. NFS sessions are established.
- B. SAN sessions are established.
- C. The disk shelf is too hot.
- D. Storage failover is disabled.
Answer: C,D
NEW QUESTION 28
You finished a new installation and executed Config Advisor successfully. You review the physical racking and cabling on one of the controllers, and notice an amber light that was not previously on.
Which two actions should you perform before you turn over the cluster for production? (Choose two.)
- A. Review AutoSupport messages which could explain the controller state.
- B. Execute Config Advisor again to check for new errors.
- C. Let the customer know the cluster is operating normally while the amber LED is on.
- D. Remove cables connected to the controller until you find the one responsible for the controller issue.
Answer: A,B
NEW QUESTION 29
......
Real Network Appliance NS0-183 Exam Questions [Updated 2021]: https://www.itpass4sure.com/NS0-183-practice-exam.html
