Updated Dec-2021 Test Engine to Practice 201 Dumps & Practice Exam
Dumps Collection 201 Test Engine Dumps Training With 255 Questions
NEW QUESTION 38
A BIG-IP Administrator contacts F5 Support, which identifies a suspected hardware failure. Which information should the BIG-IP Administrator provide to F5 Support?
- A. Qkview, EUD output
- B. Qkview, UCS archive, core files
- C. Qkview, packet capture, UCS archive
- D. Qkview, part numbers for failed components
Answer: A
NEW QUESTION 39
A BIGJP Administrator needs to load a UCS file but must exclude the license file. How should the administrator perform this task?
- A. From the CLI with command(tmos) tmsh load /sys ucs <ucs filename> no-license
- B. From the GUI, select the UCS file, unchcck the license box, and click restore
- C. From the CLI with command U tmsh load /$ys ucs <ucs filename> no-license
- D. From the GUI, select the UCS file and click restore
Answer: C
NEW QUESTION 40
A BIG-IP Administrator remotely connects to the appliance via out-of-band management using
https://mybigip mycompany net. The management portal has been working all week. When the administrator attempts to login today, the connection times out. Which two aspects should the administrator verify? (Choose two)
- A. DNS is property resolving the FQDN of the device.
- B. Packet Filters on the device are blocking port 80.
- C. The administrator has TCP connectivity to the device.
- D. The device is NOT redirecting them to http.
- E. The administrator has the latest version of the web browser.
Answer: A,C
NEW QUESTION 41
A site has assigned the ICMP monitor to all nodes and a custom monitor, based on the HTTP template, to a pool of web servers. The HTTP based monitor is working in all cases. The ICMP monitor is failing for 2 of the pool member 5 nodes.
All other settings are default. What is the status of the monitor is working in all cases?
- A. All pool members are up since the HTTPbased monitor is successful.
- B. All pool members are down since the ICMPbased monitor is failing in some cases.
- C. The pool members whose nodes are failing the ICMPbased monitor will be marked disabled.
- D. The pool members whose nodes are failing the ICMPbased monitor will be marked unavailable.
Answer: D
NEW QUESTION 42
What is the purpose of provisioning.
- A. Provisioning allows the administrator to see what modules are licensed, but no user action is ever required.
- B. Provisioning allows the administrator to activate
modules
in nonElstandard combinations. - C. Provisioning allows modules that are licensed be granted appropriate resource levels.
- D. Provisioning allows modules that are not licensed to be fully tested.
Answer: C
NEW QUESTION 43
What is the purpose of MAC masquerading.
- A. to allow both BIGElIP devices to simultaneously use the same MAC address
- B. to minimize connection loss due to ARP cache refresh delays
- C. to prevent ARP cache errors
- D. to minimize ARP entries on routers
Answer: B
NEW QUESTION 44
A BIG-IP Administrator needs to purchase new licenses for a BIG-IP appliance.
The administrator needs to know if a module is licensed and the memory requirement for that module.
Where should the administrator view this information in the System menu?
- A. Resource Provisioning
- B. Software Management
- C. Configuration > Device
- D. Configuration >OVSDB
Answer: A
NEW QUESTION 45
Which statement is true concerning cookie persistence.
- A. Cookie persistence allows persistence independent of IP addresses.
- B. Cookie persistence allows persistence even if the data are encrypted from client to pool member.
- C. If a client's browser accepts cookies, cookie persistence will always cause a cookie to be written to the client's file system.
- D. Cookie persistence uses a cookie that stores the virtual server, pool name, and member IP address in clear text.
Answer: A
NEW QUESTION 46
A configuration change is made on the standby member of a device group.
What is displayed as "Recommended Action" on the Device Management Overview screen?
- A. Activate device with the most recent configuration
- B. Synchronize the standby member configuration to the group
- C. Force active member of device group to standby
- D. Synchronize the active member configuration to the group.
Answer: B
NEW QUESTION 47
Refer to the exhibit.
An organization is reporting slow performance accessing their Intranet website, hosted in a public cloud. All employees use a single Proxy Server with the public IP of 104.219.110.168 to connect to the Internet. What should the BIG-IP Administrator of the Intranet website do to fix this issue?
- A. Change Load Balancing Method to Least Connection
- B. Change Default Persistence Profile to cookie
- C. Change Source Address to 104.219.110.168/32
- D. Change Fallback Persistence Profile to source_addr
Answer: B
NEW QUESTION 48
Refer to the exhibit.
How long will the persistence record remain in the table?
- A. 300 seconds after the initial table entry
- B. 180 seconds after the last packet
- C. 300 seconds after the last packet
- D. 180 seconds after the initial table entry
Answer: C
NEW QUESTION 49
In the BIG-IP Configuration Utility, a user requests a single screen view to determine the status of all Virtual Servers and associated pool members, as well as any iRules in use. Where should the BIG-IP Administrator instruct the user to find this view?
- A. Local Traffic > Virtual Servers
- B. Local Traffic > Network Map
- C. Local Traffic > Monitors
- D. Statistics
Answer: B
Explanation:
Network Map can display vs and its associated pool, pool member, and irule, can be retrieved, and can be quickly linked.
NEW QUESTION 50
Refer to the exhibit.
A BIG-IP Administrator creates a new Virtual Server to load balance SSH traffic. Users are unable to log on to the servers.
What should the BIG-IP Administrator do to resolve the issue?
- A. Set Destination Addresses/Mask to 0.0.0.0/0
- B. Set HTTP Profile to None
- C. Set Protocol to UDP
- D. Set Source Address to 10.1.1.2
Answer: B
NEW QUESTION 51
A BIG-IP Administrator creates a new VLAN on BIG-IP Cluster Member A and attaches an Interface to it. Although the Auto Config Sync is in place, the new VLAN does NOT show up on Cluster Member B.
What should the BIG-IP Administrator do to ensure the new VLAN is configured on each Cluster Member?
- A. Reset the Device Trust of the BIG-IP Cluster on either Cluster Member.
- B. Enable the Interface that is attached to the new VLAN on Cluster Member A.
- C. Configure the new VLAN manually on Cluster Member B.
- D. Configure a Default Route for the new VLAN on Cluster Member A.
Answer: C
NEW QUESTION 52
Which statement is true concerning iRule events.
- A. If an iRule references an event
that doesn't
occur during the client's communication, the client's connection will be terminated prematurely. - B. All iRule events
are appropriate
at any point in the clientElserver communication. - C. All iRule events relate to HTTP processes.
- D. All client traffic has data that could be used to trigger iRule events.
Answer: D
NEW QUESTION 53
Which statement is true regarding failElover.
- A. If the hardware failElover cable is disconnected, both BIGElIP devices will always assume the active role.
- B. Hardware failElover can be used in conjunction with network failover.
- C. By default, hardware faElilover detects voltage across the failElover cable and monitors traffic across the internal VLAN.
- D. Hardware failElover is disabled by default.
Answer: B
NEW QUESTION 54
A BIG-IP Administrator plans to upgrade a BIG-IP device to the latest TMOS version.
Which two tools could the administrator leverage to verify known issues for the target versions?
(Choose two.)
- A. F5 Downloads
- B. FSiHealth
- C. F5 Bug Tracker
- D. F5 University
- E. F5 End User Diagnostics (EUD)
Answer: B,C
Explanation:
F5 University -- F5 learning materials
F5 Downloads - iso download page
F5 End User Diagnostics (EUD) -- Hardware detection
NEW QUESTION 55
Where is the loadElbalancing mode specified.
- A. within the node definition
- B. within the pool member definition
- C. within the pool definition
- D. within the virtual server definition
Answer: C
NEW QUESTION 56
New Syslog servers have been deployed in an organization. The BIG-IP Administrator must reconfigure the BIG-IP system to send log messages to these servers.
In which location in the Configuration Utility can the BIG-IP Administrator make the needed configuration changes to accomplish this?
- A. System > Logs > Configuration
- B. System > Logs > Audit
- C. System > Configuration > Device
- D. System > Configuration > Local Traffic
Answer: A
NEW QUESTION 57
When can a single virtual server be associated with multiple profiles.
- A. Often. Profiles work on different layers and combining profiles is common.
- B. Unlimited. Profiles can work together in any combination to ensure that all traffic types are supported in a given virtual server.
- C. Rarely. One combination, using both the TCP and HTTP profile does occur, but it is the exception.
- D. Never. Each virtual server has a maximum of one profile.
Answer: A
NEW QUESTION 58
A virtual server is defined using a sourceEladdress based persistence profile. The
last five connections were A, B, C, A, C . Given the conditions shown in the graphic,
if a client with IP address 205.12.45.52 opens a connection to the virtual server,
which member will be used for the connection.
- A. 10.10.20.2:80
- B. 10.10.20.5:80
- C. 10.10.20.4:80
- D. 10.10.20.1:80
- E. 10.10.20.3:80
Answer: A
NEW QUESTION 59
Which three statements describe a characteristic of profiles. (Choose three.)
- A. While most virtual servers have at least one profile associated with them, it is not required.
- B. Default profiles cannot be created or deleted.
- C. Custom profiles are always based on a parent profile.
- D. A profile can be a child of one profile and a parent of another.
- E. All changes to parent profiles are propagated to their child profiles.
Answer: B,C,D
NEW QUESTION 60
The current status of a given pool is ffline.(red). Which condition could explain that state. Assume the descriptions below include all monitorsThe current status of a given pool is .ffline.(red). Which condition could explain that state. Assume the descriptions below include all monitors assigned for each scenario.
- A. The pool has a monitor assigned to it, and none of the pool members passed the test. The pool has a monitor assigned to it, and none of the pool. members passed the test.
- B. The pool has a monitor assigned to it, and only some of the pool's members passed the test.
- C. A monitor is assigned to all nodes and all nodes have passed the test. The pool's members have no specific monitor assigned to them.
- D. No monitors are currently assigned to any pool, member or node.
Answer: A
NEW QUESTION 61
Refer to the exhibit
A connection is being established to IP 1.1.1.1 on port 8080.
Which virtual server will handle the connection?
- A. fwdvs
- B. host_vs
- C. host_ 8080_VS
- D. fwd_8080_vs
Answer: B
NEW QUESTION 62
......
F5 201 Dumps Cover Real Exam Questions: https://www.itpass4sure.com/201-practice-exam.html
Real 201 dumps - Real F5 dumps PDF: https://drive.google.com/open?id=1IF-WYEFhfb0RXARUV11nmdRgXtqxp6Qw
