itPass4sure HPE6-A75 Real Exam Question Answers Updated [Sep 24, 2022]
Easily To Pass New HP HPE6-A75 Dumps with 62 Questions
HP HPE6-A75 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
NEW QUESTION 26
Refer to the exhibit.
Based on the Policy configuration shown, which VLAN will be assigned when a user with ClearPass role Engineer authenticates to the network successfully on Saturday using connection protocol WEBAUTH?
- A. Full Access VLAN
- B. Internet VLAN
- C. Deny Access
- D. Employee VLAN
Answer: D
NEW QUESTION 27
What is the purpose of the captive portal URL hash key on an AOS-Switch?
- A. It authenticates guest users based on the password the users enter hi the portal.
- B. It specifies the captive portal URL and conceals the setting in the config.
- C. It encrypts and secures the RADIUS messages that the AOS-Switch sends to ClearPass.
- D. It does not let users alter the URL that redirects them to the portal.
Answer: D
NEW QUESTION 28
An administrator implements the MultiZone feature and uses two clusters that utilize CPSec. A primary and a data zone are created. MultiZone APs successfully build sessions to the primary cluster but fail to establish sessions to the data zone cluster.
What must the administrator do to solve this problem?
- A. Enable CPSec in the MultiZone profile for both the primary and data zone.
- B. Enable MultiZone booting in the MultiZone AP apboot configuration mode.
- C. Add the MultiZone APs to the data zone's CPSec whitelist.
- D. Use different AP Group names for the two zones.
Answer: D
NEW QUESTION 29
The administrator expects the AP to connect to a cluster, but the AP tails to connect. The administrator examines the configuration of an AP from apboot mode shown in the exhibit. What can the administrator determine about the configuration of the AP?
- A. The AP is configured as a RAP to terminate on a Mobility Master.
- B. The AP is configured to terminate on a Mobility Controller in a cluster.
- C. The AP is configured to terminate on a non-cluster Mobility Controller.
- D. The AP is configured as a RAP to terminate on a stand-alone controller.
Answer: A
NEW QUESTION 30
A network administrator can set the OSPF metric-type on an AOS-Switch to Type 1 or Type 2. What is the difference?
- A. A Type 2 metric is assigned to multiple external routes that are aggregated together, while a Type 1 metric does not permit external route aggregation.
- B. A Type 2 metric marks external routes that can be advertised in NSSAs, while a Type 1 metric marks external routes that can only be advertised in normal areas.
- C. A Type 2 metric stays the same as the external route is advertised, while a Type 1 metric increments with internal OSPF link costs.
- D. A Type 2 metric assigns cost 1 to a 100 Gbps link, while a Type 1 metric assigns cost 1 to all links of 100 Mbps or higher.
Answer: C
NEW QUESTION 31
Refer to the exhibit.
An Enforcement Profile has been created in the Policy Manager as shown. Which action will ClearPass take based on this Enforcement Profile?
- A. ClearPass will send the Session-Timeout attribute in the RADIUS Access-Accept packet to the User and the user's session will be terminated after 600 seconds.
- B. ClearPass will send the Session-Timeout attribute in the RADIUS Access-Request packet to the NAD and the NAD will end the user's session after 600 seconds.
- C. ClearPass will send the Session-Timeout attribute in the RADIUS Access-Accept packet to the NAD and the NAD will end the user's session after 600 seconds.
- D. ClearPass will count down 600 seconds and send a RADIUS CoA message to the NAD to end the user's session after this time is up.
- E. ClearPass will count down 600 seconds and send a RADIUS CoA message to the user to end the user's session after this time is up.
Answer: C
NEW QUESTION 32
What is a primary use case for RPVST+ on AOS-Switches?
- A. enhanced loop protection in an MSTP network
- B. seamless integration with RSTP
- C. more granular load balancing than MSTP when access switches connect to two core switches
- D. integration of AOS-Switches in a heterogeneous vendor network that uses the Cisco protocol
Answer: D
NEW QUESTION 33
An administrator wants to implement bandwidth limits for guest users to restrict their Internet usage. On the Mobility Master (MM), where would the administrator define these limits?
- A. AAA policy
- B. Firewall policy
- C. 802.1X policy
- D. User role
Answer: B
NEW QUESTION 34
Why is a terminate session enforcement profile used during posture checks with 802.1 x authentication?
- A. To force the user to re-authenticate and run through the service flow again
- B. To blacklist the user when they are in an unhealthy posture state
- C. To send a RADIUS CoA message from the ClearPass server to the client
- D. To remediate the client applications and firewall do that updates can be installed
- E. To disconnect the user for 30 seconds when they are in an unhealthy posture state
Answer: C
NEW QUESTION 35
An administrator configures an ArubaOS-Switch for per -user tunneled node. Which protocols does the switch use to establish and maintain a connection with the Aruba Mobility Controller (MO? (Select two.)
- A. SSL
- B. IPSec
- C. PAPI
- D. GRE
Answer: C,D
NEW QUESTION 36
Refer to the exhibit.
Which statements accurately describe the status of the Onboarded devices in the configuration tor the network settings shown? (Select two.)
- A. They will connect to Employee_Secure SSID for provisioning their devices.
- B. They will use WPA2-PSK with AES when connecting to the SSID.
- C. They will perform 802.1X authentication when connecting to the SSID.
- D. They will connect to Employee_Secure SSID after provisioning.
- E. They will connect to secure_emp SSID after provisioning.
Answer: C,E
NEW QUESTION 37
An administrator creates service-based policies for AirGroup on the Mobility Master (MM). The administrator can define location-based policy limits based on which information?
- A. Controller names, controller groups, and controller Fully Qualified Domain Names (FQDNs)
- B. AP names, AP groups, controller names, and controller groups
- C. AP Fully Qualified Location Names (FQLNs) and controller Fully Qualified Domain Names (FQDNs)
- D. AP names, AP groups, and AP Fully Qualified Location Names (FQLNs)
Answer: D
NEW QUESTION 38
An administrator supports a RAP to a branch office. Employees at the branch office connect to an employee SSID that allows for split tunneling of the employee traffic. The RAP initially connects to the corporate office controller, but later loses connectivity to it.
Which operating mode should the administrator configure for a secondary SSID to be advertised during the loss of connectivity?
- A. Backup
- B. Persistent
- C. Standard
- D. Always
Answer: B
NEW QUESTION 39
Refer to the exhibit.
A known unicast packet is received from Switch-1 on the standby and must be forwarded to Switch-2. How does the VSF fabric decide which port in the aggregated (ink should forward the packet?
- A. The standby uses the typical load sharing algorithm, and it might select either its port or the commander's port.
- B. The standby sends the packet to the commander over a VSF link, and the commander decides the correct port.
- C. The standby selects the port on the designated forwarder for the aggregation.
- D. The standby uses its own port in the link aggregation to forward the fabric.
Answer: D
NEW QUESTION 40
A network administrator configures V5F settings on two Aruba 2930F switches. The switches form two separate VSF fabrics. What should the administrator check?
- A. that LLDP MAD is configured on both members
- B. that each switch is assigned a unique VSF priority
- C. that the domain ID matches on both switches
- D. that the switch with the lower priority has the lower member ID
Answer: D
NEW QUESTION 41
Which protocol do Mobility Controllers (MCs) use to detect a failed Mobility Master (MM)?
- A. SNMP
- B. IPSec
- C. PAPI
- D. VRRP
Answer: A
NEW QUESTION 42
Refer to the exhibit.
The network administrator needs to set up BGP between the two company switches. Switch-1 and Switch-2. The BGP connection does not establish. Based on the exhibits, what does the administrator need to do to fix the issue?
- A. Enable the multihop option for the neighbor on each of the switches.
- B. Enter the network command for 10.0.0.0/24 in the router BGP mode on each switch.
- C. Enable BGP on the interfaces that the switches use to reach each other.
- D. Set the update source for the neighbor to the local loopback interface on each switch.
Answer: D
NEW QUESTION 43
Refer to the exhibit.
An AD user's department attribute is configured as *HR". The user connects on Monday using their Windows Laptop to a switch that belongs to the Device Group HQ. Which role is assigned to the user in ClearPass?
- A. iOS Device
- B. Executive
- C. Remote Employee
- D. HR Local
- E. Vendor
Answer: C,D
NEW QUESTION 44
Which technologies can prevent split brain in a VSF fabric that includes Aruba 2930F switches?
- A. OOBM MAD or LLDP MAD
- B. VLAN MAD or ARP MAD
- C. LLDP MAD or VLAN MAD
- D. ARP MAD or OOBM MAD
Answer: C
NEW QUESTION 45
A company has AOS-Switches deployed at sites with inexperienced IT staff. The main office network administrators want to track if configurations change on branch switches. What should be set up for this purpose?
- A. an RMON alarm
- B. an SNMP trap
- C. an auto-config server
- D. an lP SLA profile
Answer: B
NEW QUESTION 46
Which statement is true about the databases in ClearPass?
- A. Entries in the guest user database do not expire.
- B. A Static host list can only contain a list of IP addresses.
- C. The endpoints database can only be populated by manually adding MAC addresses to the table.
- D. Entries in the local user database cannot be modified.
- E. Entries in the guest user database can be deleted.
Answer: A
NEW QUESTION 47
Refer to the exhibit.
The network administrator wants to reduce failover time If a switch link m VIAN 100 goes down. What should the administrator do?
- A. Configure graceful restart on all of the OSPF routing devices on VLAN 100.
- B. Lower the dead timer on the BDR of VLAN 100.
- C. Configure echo mode BFD on VLAN 100 on all OSPF routing devices on VLAN 100.
- D. Lower the hello timer only on the BDR of VLAN 100.
Answer: C
NEW QUESTION 48
Which ArubaOS CLl command can an administrator execute to determine if AP load balancing is enabled in a cluster?
- A. show switches
- B. show aaa cluster essid
- C. show lc-cluster group-membership
- D. show ap active
Answer: C
NEW QUESTION 49
When is it necessary to use an SNMP based Enforcement profile to send a VIAN?
- A. When we have to assign a VLAN to a wired user on a third party wired switch that doesn't support RADIUS authentication.
- B. When we have to assign a VIAN to a wired user on an Aruba Mobility Controller.
- C. When we have to assign a VLAN to a wireless user on an Aruba Mobility Controller.
- D. When we have to assign a vlan to a wired user on a third party wired switch that doesn't support RADIUS return attributes.
- E. When we have to assign a VLAN to a wired user on an Aruba Mobility Access Switch.
Answer: E
NEW QUESTION 50
......
Latest HPE6-A75 Study Guides 2022 - With Test Engine PDF: https://www.itpass4sure.com/HPE6-A75-practice-exam.html
Get New HPE6-A75 Practice Test Questions Answers: https://drive.google.com/open?id=10HmporuirKDmrFKHaJHquuGHUcWQmBY9
