Network Appliance NS0-516 Study Guide Archives Updated on Aug 23, 2023
Download NS0-516 Mock Test Study Material
NEW QUESTION # 32
A customer intends to use an E2812 system without expansion shelves. The specification for their Windows host requires that six E-Series data volumes be used.
In this scenario, how should the system be configured?
- A. three DDPs with the volumes divided equally
- B. one DDP with all the volumes
- C. two DDPs with the volumes divided equally
- D. one DDP for each volume
Answer: B
NEW QUESTION # 33
What mechanism governs control of the E-Series storage premium features? (Choose the best answer.)
- A. special USB flash drive that must be inserted into the controllers
- B. online database requiring the controllers to access the internet to activate features
- C. small toggle switches on the controller boards inside the system
- D. key file obtained from vendor and passed to system via SANtricity
- E. simple password system
Answer: D
NEW QUESTION # 34
You are adding drives to an existing Dynamic Disk Pool (DDP). In this scenario, which two drive characteristics should you consider when selecting the drives? (Choose two.)
- A. if the drives have a compatible security type
- B. if the drives are the same capacity or larger
- C. if the drives have the same firmware level
- D. if the drives are from the same manufacturer
Answer: A,B
NEW QUESTION # 35
Which data protection strategy has the most overhead capacity as a percentage of the total capacity?
- A. RAID 6
- B. RAID 5
- C. RAID 10
- D. Dynamic Disk Pools (DDP)
Answer: B
NEW QUESTION # 36
What is the proper order to power-on E-Series arrays when a storage system has at least 2 trays? (Choose the best answer.)
- A. Power on the controller drive tray first, then wait several minutes for the controller drive tray to spin up, and then power on all expansion drive trays
- B. Power up A-side power supplies first, then power up all B-side power supplies.
- C. Power all expansion drive trays first, wait several minutes for the expansion drive trays to spin up, and then power on the controller drive tray
- D. Power on in any order, since the order does not matter
Answer: A
NEW QUESTION # 37
When you arrive on a customer site, you discover that the customer network administrator has called in sick. While required power has been provided and all of the components ordered have been physically accounted for, the network will not be operational today.
Which would be the most useful tool to complete your rack & stack and initial configuration of the system? (Choose the best answer.)
- A. None of the above, come back tomorrow.
- B. a standalone switch or hub
- C. a CD containing the 10.86 version of SANtricity
- D. a Serial Port cable
Answer: C
NEW QUESTION # 38
The interval for an asynchronous mirror group should usually be equal to ______________. (Choose the best answer.)
- A. half the corresponding application's RTO
- B. the corresponding application's RTO
- C. half the corresponding application's RPO
- D. the amount of time required to copy the size of the mirror repository to the remote site
- E. the corresponding application's RPO
Answer: D
NEW QUESTION # 39
All non-I/O related activity on the storage system is recorded in the _____________. (Choose the best answer.)
- A. DACstore
- B. NVSRAM
- C. Event Log
- D. Cache backup device
- E. Storage Array Profile
Answer: A
NEW QUESTION # 40
Exhibit:
An administrator is asked to create a 5532 GiB volume from the volume group.
Referring to the exhibit how would the administrator complete this request?
- A. Create the volume after adjusting the preservation capacity
- B. Create the volume after performing space reclamation
- C. Create the volume after consolidating the capacity
- D. Create the volume from the available capacity
Answer: D
NEW QUESTION # 41
During normal operation, a failure was detected on an E-Series hardware component.
Which tool could be used to determine the location of the failed component and understand the potential recovery actions? (Choose the best answer.)
- A. Unreadable sectors log
- B. Host Mappings tab
- C. Real-time performance monitor
- D. Recovery Guru
Answer: B
NEW QUESTION # 42
Exhibit:
Referring to the exhibit, which SAS connector is supported on the NetApp E2800 E-Series family?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 43
A NetApp recommended best practice is to cable disk shelves to a controller shelf using the top-down-bottom-up method.
Why?
- A. It protects against shelf failure.
- B. It protects against drawer failure.
- C. It protects against power outages.
- D. It protects against disk failure.
Answer: A
NEW QUESTION # 44
With a system cache block size of 32K, how much cache space per I/O is "lost" if incoming I/Os are all 48K writes? (Choose the best answer.)
- A. 24K
- B. 0 - no space is lost
- C. 8K
- D. 4K
- E. 16K
Answer: E
NEW QUESTION # 45
If you want to mirror data from Los Angeles to New York (approximately a 5,000-km distance), which mirroring feature should you use?
- A. Semi-synchronous
- B. Asynchronous synchronous mode
- C. Synchronous
- D. Asynchronous
Answer: D
NEW QUESTION # 46
Exhibit:
Referring to the exhibit, which cable is an InfiniBand 4X connector?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 47
If an FDE disk fails, which characteristic is required of the replacement disk?
- A. Must be of a greater capacity
- B. Must be T10-P1 capable
- C. Must be FDE capable
- D. Must be loaded with DACstore
Answer: C
NEW QUESTION # 48
What does the CHAP secret accomplish for an E-Series system?
- A. Ethernet management authentication
- B. FC authentication
- C. SAS authentication
- D. iSCSI authentication
Answer: D
NEW QUESTION # 49
......
NS0-516 Questions Prepare with Learning Information: https://www.itpass4sure.com/NS0-516-practice-exam.html
Practice Material for NS0-516 Exam Question Preparation: https://drive.google.com/open?id=153LMUwm3hR1TcgERJB1wI8cKstVVNj7q
