[Jan-2022] Get 100% Real JN0-334 Exam Questions, Accurate & Verified itPass4sure Dumps in the Real Exam!
Pass Your JNCIS-SEC Exams Fast. All Top JN0-334 Exam Questions Are Covered.
Junos Security: Guide to Junos for the SRX Services Gateways and Security Certification (1st Edition)
This book is written by R. Cameron, B. Woodberg, P. Giecco, T. Eberhard, and J. Quinn to help candidates pass the Juniper JN0-334 test. It is the approved guide to the Juniper Networks SRX series that gives practical and detailed skills relating to the deployment, configuration, and operation of the SRX and also acts as the reference for passing the Juniper Security exams. Through the resources in this manual, candidates will master a wide array of topics relating to the SRX Junos services gateways such as mitigating attacks, managing threats, and accelerating WAN. It can be argued that this is the perfect study material if you want to master the SRX Junos software and get on par with the latest troubleshooting concepts, SRX security policy, SRX platforms, and Juniper Networking portfolio. The best part? It is available on Amazon for only around $40 for the Kindle edition.
Basic Exam Facts
The JNCIS-SEC, or simply the Juniper JN0-334, is a validation that’s administered by Pearson VUE. It has a duration of 90 minutes and carries 65 multiple-choice questions. Juniper always grades the exam-takers on a pass/fail basis and they strongly advise that candidates must have a working knowledge of the Juniper Junos Software Release 19.1 before attempting this test.
NEW QUESTION 47
Which three statements are correct about fabric interfaces on the SRX5800? (Choose three.)
- A. Fabric interfaces must be system-assigned interfaces.
- B. Fabric interfaces must be user-assigned interfaces.
- C. Fabric interfaces must be on the same Layer 2 segment.
- D. Fabric interfaces must have a user-assigned IP address.
- E. Fabric interfaces must be same interface type.
Answer: A,C,E
NEW QUESTION 48
What information does JIMS collect from domain event log sources? (Choose two.)
- A. For user login events, JIMS collects the login source IP address and username information.
- B. For device login events, JIMS collects the device IP address and machine name information.
- C. For user login events, JIMS collects the username and group membership information.
- D. For device login events. JIMS collects the devide IP address and operating system version.
Answer: A,B
NEW QUESTION 49
What information does JIMS collect from domain event log sources? (Choose two)
- A. For device login events. JIMS collects the device IP address and operating system version.
- B. For user login events. JIMS collects the username and group membership information.
- C. For user login events. JIMS collects the login source IP address and username information
- D. For device login events. JIMS collects the device IP address and machine name information
Answer: D
NEW QUESTION 50
Which default protocol and port are used for JIMS to SRX client communication?
- A. RPC over TCP, port 135
- B. WMI over TCP; port 389
- C. HTTPS over TCP: port 443
- D. ADSI over TCP; port 389
Answer: C
NEW QUESTION 51
Exhibit.
Which two statements describe the output shown in the exhibit"? (Choose two)
- A. Redundancy group 1 experienced an operational failure.
- B. Redundancy group 1 was administratively failed over.
- C. Node 1 is passing traffic for redundancy group 1
- D. Node 0 is passing traffic for redundancy group 1
Answer: A,C
NEW QUESTION 52
Click the Exhibit button.
You notice that your SRX Series device is not blocking HTTP traffic as expected.
Referring to the exhibit, what should you do to solve the problem?
- A. Configure the SRX Series device to operate in packet-based mode.
- B. Move the deny-httppolicy to the bottom of the policy list.
- C. Commit the configuration.
- D. Reboot the SRX Series device.
Answer: D
NEW QUESTION 53
Referring to the configuration shown in the exhibit, which two statements are true? (Choose two)
- A. The syslog is configured for an info facility
- B. The log is being sent to a remote server
- C. The log is being stored on the local Routing Engine
- D. The syslog is configured for a user facility
Answer: A,D
NEW QUESTION 54
Click the Exhibit button.
Referring to the exhibit, which statement is true?
- A. Hosts are always able to communicate through the SRX Series device no matter the threat score assigned to them on the infected host feed.
- B. Hosts are unable to communicate through the SRX Series device after being placed on the infected host feed with a high enough threat score.
- C. Malicious HTTP file downloads are never blocked.
- D. Malicious HTTP file downloads are always blocked.
Answer: B
NEW QUESTION 55
Click the Exhibit button.
Referring to the SRX Series flow module diagram shown in the exhibit, where is IDP/IPS processed?
- A. Screens
- B. Security Policy
- C. Forwarding Lookup
- D. Services ALGs
Answer: D
NEW QUESTION 56
Which of the following lists the correct order that the Sky ATP pipeline evaluates traffic?
- A. Cache lookup. Antivirus Scanning, Static Analysis, Dynamic Analysis
- B. Cache lookup. Static Analysis. Dynamic Analysis. Antivirus Scanning
- C. Static Analysis. Cache lookup. Antivirus Scanning, Dynamic Analysis
Answer: A
NEW QUESTION 57
You are asked to convert two standalone SRX Series devices to a chassis cluster deployment. You must ensure that your IPsec tunnels will be compatible with the new deployment In this scenario: which two interfaces should be used when binding your tunnel endpoints? (Choose two)
- A. lo0
- B. reth
- C. ge
- D. pp0
Answer: A,B
NEW QUESTION 58
What are two valid JIMS event log sources? (Choose two )
- A. Microsoft Windows Server 2012 audit logs
- B. Microsoft Active Directory audit logs
- C. Microsoft Exchange Server event logs
- D. Microsoft Active Directory server event logs
Answer: A,C
NEW QUESTION 59
Which security log message formal reduces the consumption of CPU and storage?
- A. BSD syslog
- B. WELF
- C. binary
- D. structured syslog
Answer: C
NEW QUESTION 60
Exhibit.
The output shown in the exhibit is displayed in which formal?
- A. WELF
- B. sd-syslog
- C. binary
- D. syslog
Answer: A
NEW QUESTION 61
Exhibit.
You have configured your SRX Series device to receive authentication information from a JIMS server However, the SRX is not receiving any authentication information Referring to the exhibit, how would you solve the problem'
- A. Update the IP address of the JIMS server
- B. Change the SRX configuration to connect to the JIMS server using HTTP
- C. Generate an access token on the SRX device that matches the access token on the JIMS server
- D. Use the JIMS Administrator user interface to add the SRX device as a client.
Answer: A
NEW QUESTION 62
......
Juniper JN0-334 Exam Certification Details:
| Exam Registration | PEARSON VUE |
| Sample Questions | Juniper JN0-334 Sample Questions |
| Exam Price | $300 USD |
| Number of Questions | 65 |
| Recommended Training | Juniper Security |
| Passing Score | Variable (60-70% Approx.) |
| Duration | 90 minutes |
| Exam Code | JN0-334 JNCIS-SEC |
| Exam Name | Security Specialist |
Penetration testers simulate JN0-334 exam: https://www.itpass4sure.com/JN0-334-practice-exam.html
