HP New 2022 HPE6-A73 Test Tutorial (Updated 102 Questions)
HPE6-A73 Exam Questions Dumps, Selling HP Products
For more info visit
Configuring Hewlett Packard Enterprise GreenLake Solutions HP Reference
NEW QUESTION 26
A company requires access by all users guests, and employees to be authenticated Employees will be authenticated using 802 1X. whereas guests will be authenticated using captive portal Which type of authentication must be configured on an AOS-CX switch ports where both guests and employees connect?
- A. Both 802.1X and captive portal
- B. 802 1X only
- C. Both 802 1X and MAC-Auth
- D. 802.1X, captive portal, and MAC-Auth
Answer: C
NEW QUESTION 27
Examine the following AOS-CX configuration:
Based on this configuration, which statement is correct regarding IoT traffic?
- A. If a specific route is not available in the routing table, the traffic will be routed to 10.100.1.2
- B. If 10.100.1.2 is not reachable, the IoT traffic will be automatically dropped by the switch
- C. The next hop of 10.100.1.2 can be one or more hops away from the AOS-CX switch
- D. All routes are ignored in the routing table for IoT traffic, which is routed to 10.100.1.2
Answer: A
NEW QUESTION 28
Examine the network exhibit.
A company has a guest implementation for wireless and wired access. Wireless access is implemented through a third-party vendor. The company is concerned about wired guest traffic traversing the same network as the employee traffic. The network administrator has established a GRE tunnel between AOS-CX switches where guests are connected to a routing switch in the DMZ.
Which feature should the administrator implement to ensure that the guest traffic is tunneled to the DMZ while the employee traffic is forwarded using OSPF?
- A. OSPF route maps using the "set metric" command
- B. User-based tunneling (UBT)
- C. Policy-based routing (PBR)
- D. Classifier policies
Answer: C
NEW QUESTION 29
How does PIM build the IP multicast routing table to route traffic between a multicast source and one or more receivers9
- A. It uses the unicast routing table and reverse path forwarding (RPF )
- B. It uses the Bellman-Ford algorithm derived from distance vector protocols
- C. It uses IGMP and calculates a shortest path tree (SPT).
- D. It uses the shortest path first (SPF) algorithm derived from link state protocols.
Answer: A
NEW QUESTION 30
A company uses NetEdit to manage a network of 700 AOS-CX switches and approximately 1,000 other SNMP-capable devices.
Which management solution should the company use to monitor all the devices, as well as see a topology picture of how all the devices are connected together?
- A. Aruba Activate
- B. Aruba AirWave
- C. Network Analysis Engine (NAE)
- D. NetEdit
Answer: D
NEW QUESTION 31
What is a best practice concerning voice traffic and dynamic segmentation on AOS-CX switches?
- A. Controller authentication and port-based tunneling of the voice traffic
- B. Switch authentication and local forwarding of the voice traffic
- C. Switch authentication and user-based tunneling of the voice traffic
- D. Controller authentication and user-based tunneling of the voice traffic
Answer: A
NEW QUESTION 32
A company has a third-party AAA server solution The campus access layer was just upgraded to AOS-CX switches thatperform access control with MAC-Auth and 802 IX The company has an Aruba Mobility Controller (MC) solution forwireless, and they want to leverage the firewall policies on the controllers for the wired traffic.What is correct about how the company should implement a security solution w here the wired traffic is processed by the MCs?
- A. Implement downloadable user roles with a gateway role defined on the AOS-CX switches.
- B. Implement standards-based RADIUS VSAs to pass policy information directly to the AOS-CX switches and MCs
- C. Implement local user roles with a gateway role defined on the AOS-CX switches.
- D. Implement downloadable user roles with a device role defined on the AOS-CX sw itches and MCs
Answer: C
NEW QUESTION 33
A network engineer is examining NAE graphs from the Dashboard but notices that the time shown in the graph does not represent the current time. The engineer verifies that the AOS-CX switch is configured for NTP and is successfully synchronized. What should be done to fix this issue?
- A. Ensure NetEdit and the AOS-CX switch are synchronized to the same NTP server
- B. Ensure the engineer's PC is synchronized to the same NTP server as the AOS-CX switch
- C. Ensure the engineer's web browser is configured for the same timezone as the AOS-CX switch
- D. Enable trust settings for the AOS-CX switch's SSL certificate
Answer: A
NEW QUESTION 34
What is the correct way of associating a VRF instance to either a VLAN or an interface?
- A. Switch(config)# interface <interface-ID>
Switch(config-if)# vlan access <VLAN-ID> vrf attach <vrf-name> - B. Switch(config)# vlan <VLAN-ID> vrf attach < vrf-name >
- C. Switch(config)# vlan <VLAN-ID> vrf < vrf-name >
- D. Switch(config)# vlan <VLAN-ID>
Switch(config-vlan-<VLAN-ID># vrf attach < vrf-name >
Answer: D
NEW QUESTION 35
A network administrator needs to replace an antiquated access layer solution with a modular solution involving AOS-CX switches. The administrator wants to leverage virtual switching technologies. The solution needs to support high-availability with dual-control planes.
Which solution should the administrator implement?
- A. AOS-CX 6400
- B. AOS-CX 8325
- C. AOS-CX 6300
- D. AOS-CX 8400
Answer: B
NEW QUESTION 36
What is correct regarding rate limiting and egress queue shaping on AOS-CX switches?
- A. Only a traffic rate and burst size can be defined for a queue
- B. Limits can be defined only for broadcast and multicast traffic
- C. Rate limiting and egress queue shaping can be used to restrict inbound traffic
- D. Rate limiting and egress queue shaping can be applied globally
Answer: B
NEW QUESTION 37
A company is implementing AOS-CX switches at the access layer. The company wants to implement access control for employees and guests.
Which security features will require a ClearPass server to be installed and used by the company?
- A. Downloadable user roles
- B. Dynamic segmentation
- C. User-based tunneling (UBT)
- D. Change of authorization (CoA)
Answer: B
NEW QUESTION 38
Examine the AOS-CX switch output:
Based on this output, what is correct?
- A. Only 802 1X authentication is configured on the port
- B. 802.1X authentication was successful, but MAC authentication is yet to start
- C. A local user role was deployed using a ClearPass solution
- D. 802 1X authentication occurred and downloadable user rotes are deployed
Answer: D
NEW QUESTION 39
How does PIM build the IP multicast routing table to route traffic between a multicast source and one or more receivers?
- A. It uses the shortest path first (SPF) algorithm derived from link state protocols
- B. It uses the unicast routing table and reverse path forwarding (RPF)
- C. It uses IGMP and calculates a shortest path tree (SPT)
- D. It uses the Bellman-Ford algorithm derived from distance vector protocols
Answer: B
NEW QUESTION 40
What is correct regarding policy-based routing?
- A. Monitoring of policy interfaces occurs every 60 seconds.
- B. Policies can only be applied to routed interfaces.
- C. Policy actions include routing permitting or dropping traffic.
- D. Policies can be applied inbound and outbound.
Answer: B
NEW QUESTION 41
A network administrator wants to replace older access layer switches with AOS-CX 6300 switches.
Which virtual switching technology can the administrator implement with this solution?
- A. Only VSF
- B. Only Backplane stacking
- C. Only VSX
- D. Both VSF and VSX
Answer: A
NEW QUESTION 42
Examine the attached diagram.
The two PCs are located in VLAN 11 (10.1.11.0/24). Which example defines how to implement active gateway on the VSX core for VLAN 11?
- A. interface lag 254
active-gateway ip 10.1.11.1
active-gateway mac 02:02:00:00:01:00 - B. interface vlan 11
active-gateway ip 10.1.11.1
active-gateway mac 02:02:00:00:01:00 - C. interface lag 254
active-gateway vlan 11 ip 10.1.11.1
active-gateway vlan 11 mac 02:02:00:00:01:00 - D. vsx
vrrp group 1
Answer: B
NEW QUESTION 43
What is required when implementing captive portal an AOS-CX switches?
- A. Device fingerprinting
- B. AAA server
- C. Web server running on the switch
- D. Certificate installed on the switch
Answer: B
NEW QUESTION 44
Examine the commands entered on an AOS-CX switch:
What is true regarding this configuration for traffic received on interface 100?
- A. The default next-hop address supersedes the two preceding next-hop addresses.
- B. The traffic is always dropped if the next-hop addresses are unreachable.
- C. The next-hop address of 1.1.1.1 is overwritten by the next-hop address of 2.2.2.2.
- D. The traffic will be routed with the IP routing table entries if the next-hop addresses are unreachable.
Answer: A
NEW QUESTION 45
A network engineer is using NetEdit to manage AOS-CX switches. The engineer notices that a lot of third-party VoIP phonesare showing up in the NetEdit topology The engineer deletes these, but they are automatically rediscovered by NetEdit andadded back in What should the administrator do to solve this problem?
- A. Change the VoIP phone SNMP community string to something unknown by NetEdit.
- B. Disable the RESTful API on all the VoIP phones
- C. Disable LLDP globally on the AOS-CX switches where phones are connected
- D. Disable SSH access on all the VoIP phones.
Answer: A
NEW QUESTION 46
An administrator is defining a VSX LAG on a pair of AOS-CX switches that are defined as pnmary and secondary The VSX LAG fails to establish successfully with a remote switch; however, after verification, the remote switch is configured correctly. The administrator narrows down the problem to the configuration on the AOS-CX switches.
What would cause this problem?
- A. LACP was enabled in active mode on the VSX LAG
- B. The VSX LAG hash does not match the remote peer
- C. Local optimization was not enabled on the VSX LAG
- D. The VSX LAG interfaces are in layer-3 mode
Answer: B
NEW QUESTION 47
A network engineer for a company with 896 users across a multi-building campus wants to gather statistics on an important switch uplink and create actions based on issues that occur on the uplink. How often does an NAE agent gather information from the current state database in regard to the uplink interfaces?
- A. Once every 1 second
- B. Once every 60 seconds
- C. Once every 5 seconds
- D. Once every 30 seconds
Answer: B
NEW QUESTION 48
Which protocol does NetEdit use to discover devices in a subnet during the discovery process?
- A. LLDP
- B. ICMP
- C. ARP
- D. DHCP
Answer: A
NEW QUESTION 49
A network administrator is implementing NAE on AOS-CX switches. When attempting to create an agent on a particular switch, the agent appears in the NAE Agents panel with a red triangle error symbol and a status of "Unknown".
What is the cause of this issue?
- A. The administrator does not have the appropriate credentials to interact with NAE
- B. The RESTful API has not been enabled on the AOS-CX switch
- C. A connectivity issue exists between NAE and the AOS-CX switch
- D. The number of scripts or agents has exceeded the hardware's capabilities
Answer: C
NEW QUESTION 50
......
HPE6-A73 Cert Guide PDF 100% Cover Real Exam Questions: https://www.itpass4sure.com/HPE6-A73-practice-exam.html
Pass HPE6-A73 Review Guide, Reliable HPE6-A73 Test Engine: https://drive.google.com/open?id=12wn1_KGcXCevjSXsJcMRAVZzH1dKE2Pw
