[Feb 26, 2024] Uplift Your PCNSE Exam Marks With The Help of PCNSE Dumps
Use Palo Alto Networks PCNSE Dumps To Succeed Instantly in PCNSE Exam
The PCNSE certification exam consists of 60 multiple-choice questions that must be completed within 120 minutes. Candidates who pass the exam will receive a certificate that recognizes their expertise in using Palo Alto Networks security products to protect their organization's network from the latest cyber threats. Palo Alto Networks Certified Security Engineer (PCNSE) PAN-OS 10.0 certification is valid for two years, after which candidates must recertify to maintain their certification.
The PCNSE certification is beneficial for individuals looking to advance their careers in network security. Palo Alto Networks Certified Security Engineer (PCNSE) PAN-OS 10.0 certification demonstrates to potential employers that the individual has the knowledge and skills required to deploy and manage Palo Alto Networks security solutions. Additionally, the certification can lead to higher salaries and better job opportunities.
How to Study for PCNSE Exam
To guarantee your readiness for the PCNSE test, be certain you have comprehensive and practical knowledge of Palo Alto’s next-generation hardware firewalls, including GlobalProtect, VM-Series firewalls, and Panorama management environment. Regardless of where you stand in terms of your experience with Palo Alto products — expert, intermediate, or beginner — the below-mentioned learning resources will help prepare you to blaze through your test. Please note that Palo Alto Network has a meticulously developed curriculum. A bulk of the materials listed here was developed, authorized, and recommended by the vendor as useful guides in preparing for the PCNSE exam.
NEW QUESTION # 72
Which three use cases are valid reasons for requiring an Active/Active high availability deployment? (Choose three.)
- A. The environment requires Layer 2 interfaces in the deployment
- B. The environment requires that both firewalls maintain their own routing tables for faster dynamic routing protocol convergence
- C. The environment requires that traffic be load-balanced across both firewalls to handle peak traffic spikes
- D. The environment requires real, full-time redundancy from both firewalls at all times
- E. The environment requires that all configuration must be fully synchronized between both members of the HA pair
Answer: B,C,D
Explanation:
Explanation
Active/Active high availability is a deployment mode that allows both firewalls in an HA pair to actively process traffic and share the load. Active/Active HA is suitable for environments that require real, full-time redundancy from both firewalls at all times, as there is no failover time or session loss in case of a firewall failure. Active/Active HA is also suitable for environments that require that both firewalls maintain their own routing tables for faster dynamic routing protocol convergence, as each firewall can run its own routing protocols and exchange routes with other routers independently. Active/Active HA is also suitable for environments that require that traffic be load-balanced across both firewalls to handle peak traffic spikes, as each firewall can process a portion of the traffic and increase the overall throughput and performance.
Active/Active HA is not suitable for environments that require Layer 2 interfaces in the deployment, as Layer
2 interfaces are not supported in Active/Active HA mode. Active/Active HA is also not suitable for environments that require that all configuration must be fully synchronized between both members of the HA pair, as some configuration settings are not synchronized in Active/Active HA mode, such as virtual router configuration, virtual wire configuration, and QoS configuration. References: :
https://docs.paloaltonetworks.com/pan-os/10-2/pan-os-admin/high-availability/set-up-activeactive-ha :
https://docs.paloaltonetworks.com/pan-os/10-2/pan-os-admin/high-availability/set-up-activeactive-ha/determine-
NEW QUESTION # 73
Which two virtualized environments support Active/Active High Availability (HA) in PAN-OS 8.0?
(Choose two.)
- A. VMware ESX
- B. VMware NSX
- C. KVM
- D. AWS
Answer: A,C
NEW QUESTION # 74
Which value in the Application column indicates UDP traffic that did not match an App-ID signature?
- A. unknown-udp
- B. unknown-ip
- C. not-applicable
- D. incomplete
Answer: A
Explanation:
To safely enable applications you must classify all traffic, across all ports, all the time. With App- ID, the only applications that are typically classified as unknown traffic--tcp, udp or non-syn-tcp--in the ACC and the Traffic logs are commercially available applications that have not yet been added to App-ID, internal or custom applications on your network, or potential threats.
NEW QUESTION # 75
Which data flow describes redistribution of user mappings?
- A. Domain Controller to User-ID agent
- B. User-ID agent to Panorama
- C. firewall to firewall
- D. User-ID agent to firewall
Answer: C
Explanation:
Explanation
https://www.paloaltonetworks.com/documentation/71/pan-os/pan-os/user-id/configure-firewalls-to-redistribute-u
NEW QUESTION # 76
Place the steps in the WildFire process workflow in their correct order.
Answer:
Explanation:
NEW QUESTION # 77
What is the dependency for users to access services that require authentication?
- A. Disabling the authentication timeout
- B. An authentication sequence that includes those services
- C. A Security policy allowing users to access those services
- D. An Authentication profile that includes those services
Answer: C
NEW QUESTION # 78
What are three possible verdicts that WildFire can provide for an analyzed sample? (Choose three)
- A. Suspicious
- B. Malware
- C. Clean
- D. Grayware
- E. Bengin
- F. Adware
Answer: B,D,E
Explanation:
https://www.paloaltonetworks.com/documentation/70/pan-HYPERLINK
"https://www.paloaltonetworks.com/documentation/70/pan-os/newfeaturesguide/wildfire- features/wildfire-grayware-verdict"os/newfeaturesguide/wildfire-features/wildfire-grayware-verdict
NEW QUESTION # 79
An administrator is using Panorama and multiple Palo Alto Networks NGFWs. After upgrading all devices to the latest PAN-OS software, the administrator enables log forwarding from the firewalls to PanoramA.
Pre-existing logs from the firewalls are not appearing in PanoramA.
Which action would enable the firewalls to send their pre-existing logs to Panorama?
- A. Use the ACC to consolidate the logs
- B. Use the scp logdb export command
- C. Export the log database
- D. Use the import option to pull logs.
Answer: B
Explanation:
Explanation
commands:
request logdb
migrate-to-panorama start end-timestart-timetype
https://docs.paloaltonetworks.com/panorama/9-0/panorama-admin/set-up-panorama/install-content-and-software
NEW QUESTION # 80
A network security engineer wants to prevent resource-consumption issues on the firewall.
Which strategy is consistent with decryption best practices to ensure consistent performance?
- A. Use RSA in a Decryption profile tor higher-priority and higher-risk traffic, and use less processor-intensive decryption methods for lower-risk traffic
- B. Use PFS in a Decryption profile for higher-priority and higher-risk traffic, and use less processor-intensive decryption methods for tower-risk traffic
- C. Use Decryption profiles to drop traffic that uses processor-intensive ciphers
- D. Use Decryption profiles to downgrade processor-intensive ciphers to ciphers that are less processor-intensive
Answer: D
Explanation:
Explanation
According to the Palo Alto Networks documentation, "Decryption Profiles define the cipher suite settings the firewall accepts so you can protect against vulnerable, weak protocols and algorithms. You can also use Decryption Profiles to downgrade processor-intensive ciphers to ciphers that are less processor-intensive." References:
https://docs.paloaltonetworks.com/best-practices/10-2/decryption-best-practices/decryption-best-practices/data-c
NEW QUESTION # 81
An administrator wants to upgrade a firewall HA pair to PAN-OS 10.1 The firewalls are currently running PAN-OS 8.1.17.
Which upgrade path maintains synchronization of the HA session (and prevents network outage)?
- A. Upgrade two major versions at a time
- B. Upgrade the HA pair to a base image
- C. Upgrade directly to the target major version
- D. Upgrade one major version at a time
Answer: D
Explanation:
When you upgrade from one PAN-OS feature release version to a later feature release, you cannot skip the installation of any feature release versions in the path to your target release. In addition, the recommended upgrade path includes installing the latest maintenance release in each release version before you install the base image for the next feature release version. https://docs.paloaltonetworks.com/pan-os/10-1/pan-os-upgrade/upgrade-pan-os/upgrade-the-firewall-pan-os/determine-the-upgrade-path.html
NEW QUESTION # 82
How would an administrator monitor/capture traffic on the management interface of the Palo Alto Networks NGFW?
- A. Use the tcpdump command.
- B. Use the debug dataplane packet-diag set capture stage firewall file command.
- C. Use the debug dataplane packet-diag set capture stage management file command.
- D. Enable all four stages of traffic capture (TX, RX, DROP, Firewall).
Answer: A
Explanation:
Reference:
https://live.paloaltonetworks.com/t5/Learning-Articles/How-to-Run-a-Packet-Capture/ta-p/62390
NEW QUESTION # 83
A firewall engineer creates a destination static NAT rule to allow traffic from the internet to a webserver hosted behind the edge firewall. The pre-NAT IP address of the server is 153.6 12.10, and the post-NAT IP address is 192.168.10.10. Refer to the routing and interfaces information below.
What should the NAT rule destination zone be set to?
- A. Outside
- B. Inside
- C. None
- D. DMZ
Answer: A
Explanation:
Explanation
The destination zone in the NAT rule is determined after the route lookup of the destination IP address in the original packet (that is, the pre-NAT destination IP address).
https://docs.paloaltonetworks.com/pan-os/10-1/pan-os-networking-admin/nat/nat-configuration-examples/destina The NAT rule destination zone should be set to the zone where the traffic is destined before NAT. In this case, the traffic from the internet is destined to the pre-NAT IP address of the server, which is 153.6.12.10. This IP address belongs to the Outside zone, as shown in the routing and interfaces information. Therefore, the NAT rule destination zone should be set to Outside. The other options are not correct. None is not a valid option for the NAT rule destination zone. Inside and DMZ are the zones where the traffic is destined after NAT, which is
192.168.10.10. References: :
https://docs.paloaltonetworks.com/pan-os/10-2/pan-os-admin/networking/nat/source-and-destination-nat/configu
NEW QUESTION # 84
What type of address object would be useful for internal devices where the addressing structure assigns meaning to certain bits in the address, as illustrated in the diagram?
- A. IP Range
- B. IP Address
- C. IP Netmask
- D. IP Wildcard Mask
Answer: D
Explanation:
Explanation
https://docs.paloaltonetworks.com/pan-os/10-2/pan-os-admin/policy/use-address-object-to-represent-ip-addresse
NEW QUESTION # 85
An administrator wants multiple web servers In the DMZ to receive connections initiated from the internet.
Traffic destined for 206.15.22.9 port 80/TCP needs to be forwarded to the server at 10.1.1.22.
Based on the image, which NAT rule will forward web-browsing traffic correctly?
- A.
- B.
- C.
- D.
Answer: C
NEW QUESTION # 86
Which two statements correctly describe Session 380280? (Choose two.)
- A. The session has ended with the end-reason unknown.
- B. The application has been identified as web-browsing.
- C. The session went through SSL decryption processing.
- D. The session did not go through SSL decryption processing.
Answer: B,C
NEW QUESTION # 87
Which two features does PAN-OS® software use to identify applications? (Choose two)
- A. port number
- B. transaction characteristics
- C. session number
- D. application layer payload
Answer: B,D
Explanation:
https://docs.paloaltonetworks.com/pan-os/8-1/pan-os-admin/app-id/application-level-gateways#
NEW QUESTION # 88
A Security policy rule is configured with a Vulnerability Protection Profile and an action of "Deny." Which action will this configuration cause on the matched traffic?
- A. The Profile Settings section will be grayed out when the Action is set to "Deny"
- B. The "Deny" action will supersede the per-severity defined actions defined in the associated Vulnerability Protection Profile It will cause the firewall to deny the matched sessions.
Any configured Security Profiles have no effect if the Security policy rule action is set to "Deny" - C. The configuration will allow the matched session unless a vulnerability signature is detected.
- D. It will cause the firewall to skip this Security policy rule. A warning will be displayed during a commit
Answer: B
Explanation:
Explanation
https://docs.paloaltonetworks.com/pan-os/10-0/pan-os-admin/policy/security-profiles.html
First note in above link states:
"Security profiles are not used in the match criteria of a traffic flow.
The security profile is applied to scan traffic after the application or category is allowed by the security policy."
The first thing the firewall checks per it's flow is the security policy match and action.
The Security Profile never gets checked if a match happens on a policy set to deny that match.
NEW QUESTION # 89 
What will be the source address in the ICMP packet?
- A. 10.30.0.93
- B. 192.168.93.1
- C. 10.46.72.93
- D. 10.46.64.94
Answer: D
NEW QUESTION # 90
The firewall determines if a packet is the first packet of a new session or if a packet is part of an existing session using which kind of match?
- A. 6-tuple match:
Source IP Address, Destination IP Address, Source port, Destination Port, Protocol, and Source Security Zone - B. 7-tuple match:
Source IP Address, Destination IP Address, Source port, Destination Port, Source User, URL Category, and Source Security Zone - C. 5-tuple match:
Source IP Address, Destination IP Address, Source port, Destination Port, Protocol - D. 9-tuple match:
Source IP Address, Destination IP Address, Source port, Destination Port, Source User, Source Security Zone,
Answer: A
Explanation:
Destination Security Zone, Application, and URL Category
Explanation:
https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClVECA0
NEW QUESTION # 91
A company wants to install a PA-3060 firewall between two core switches on a VLAN trunk link. They need to assign each VLAN to its own zone and to assign untagged (native) traffic to its own zone which options differentiates multiple VLAN into separate zones?
- A. Create VLAN objects for each VLAN and assign VLAN interfaces matching each VLAN ID. Repeat for every additional VLANand use a VLAN ID of 0 for untagged traffic. Assign each interface/subinterface to a unique zone.
- B. Create V-Wire objects with two V-Wire interfaces and define a range "0- 4096" in the 'Tag Allowed filed of the V-Wire object.
- C. Create V-Wire objects with two V-Wire sub interface and assign only a single VLAN ID to the "Tag Allowed field one of the V-Wire object Repeat for every additional VLAN and use a VIAN ID of 0 for untagged traffic. Assign each interface/subinterfaceto a unique zone.
- D. Create Layer 3 sub interfaces that are each assigned to a single VLAN ID and a common virtual router.
The physical Layer 3interface would handle untagged traffic. Assign each interface /subinterface to a unique zone. Do not assign any interface anIP address
Answer: B
NEW QUESTION # 92
A company requires that a specific set of ciphers be used when remotely managing their Palo Alto Networks appliances. Which profile should be configured in order to achieve this?
- A. SSH Service profile
- B. SSL/TLS Service profile
- C. Decryption profile
- D. Certificate profile
Answer: A
NEW QUESTION # 93
Which three options are supported in HA Lite? (Choose three.)
- A. Synchronization of IPsec security associations
- B. Configuration synchronization
- C. Virtual link
- D. Active/passive deployment
- E. Session synchronization
Answer: A,B,D
Explanation:
"The PA-200 firewall supports HA Lite only. HA Lite is an active/passive deployment that provides configuration synchronization and some runtime data synchronization such as IPSec security associations. It does not support any session synchronization (HA2), and therefore does not offer stateful failover." Reference:
https://www.paloaltonetworks.com/documentation/80/pan-os/web-interface-help/device/device-high-availability/ha-lite
NEW QUESTION # 94
......
Palo Alto Networks Dumps - Learn How To Deal With The Exam Anxiety: https://www.itpass4sure.com/PCNSE-practice-exam.html
Ultimate Guide to PCNSE Dumps - Enhance Your Future Career Now: https://drive.google.com/open?id=1LT8gpU4Aiw24Y2sH6YSN9SV5_NfJK7mT
