[Dec 01, 2021] 500-920 Dumps PDF and Test Engine Exam Questions - itPass4sure [Q12-Q29]

Share

[Dec 01, 2021] 500-920 Dumps PDF and Test Engine Exam Questions - itPass4sure

Verified 500-920 exam dumps Q&As with Correct 42 Questions and Answers

NEW QUESTION 12
Which statement regarding the UCS C-senes connectivity modes best describes connectivity options in a UCS Manager integrated environment?

  • A. UCS C-series servers may be connected to multiple UCS Manager domains at the same time
  • B. UCS C-series servers may be connected with or without the use of Fabric Extenders (FEX) in environments running UCS Manager Software Release 2 2 or later
  • C. UCS C-series servers must be connected to Fabric Interconnects using Fabric Extenders (FEX)
  • D. All UCS C-series servers in a single UCS Manager domain must share the same connectivity model

Answer: B

 

NEW QUESTION 13
Which two ports on a pair of Cisco Fabric Interconnects must be properly cabled for the pair to form a cluster? (Choose two )

  • A. L1 > L2
  • B. L2 > L1
  • C. L1 > L1
  • D. L2 > L2

Answer: C,D

 

NEW QUESTION 14
When troubleshooting UCS initialization issues that require Fabric Interconnect reboots, which Fabric Interconnect should be rebooted first?

  • A. Both Fabric Interconnects must be rebooted simultaneously
  • B. The subordinate Fabric Interconnect
  • C. The primary Fabric Interconnect
  • D. The Cisco UCS Manager will determine with Fabric Interconnect to reboot

Answer: C

 

NEW QUESTION 15
After performing a UCS firmware upgrade, which two UCS components will require updated drivers? (Choose two )

  • A. RAID Controllers
  • B. Cisco Fabric Interconnects
  • C. Cisco UCS Manager
  • D. VIC Cards and Fiber Channel HBAs

Answer: B,D

 

NEW QUESTION 16
When server is booting from SAN, which command verifies the PLOGI sessions with the target?

  • A. Lunmap
  • B. FCMap
  • C. FCIist
  • D. Lunlist

Answer: D

 

NEW QUESTION 17
Which two interfaces allow access to Cisco UCS Manager? (Choose two )

  • A. Cisco IMC
  • B. Cisco UCS Manager XML API
  • C. Cisco KVM
  • D. Cisco UCS Manager GUI

Answer: B,D

 

NEW QUESTION 18
What is the result of enabling the Core File Exporter in UCS Manager?

  • A. A core dump must be remotely activated by Cisco TAC.
  • B. If a subsequent triggering event occurs, a core dump will be generated and sent by TFTP
  • C. A core dump will immediately be generated and will be exported
  • D. A core dump file will be immediately created and transmitted using HTTP protocol

Answer: C

 

NEW QUESTION 19
In a Cisco UCS Manager, if all KVM sessions to each server fail to start, what is likely causing the problem?

  • A. Cisco UCS Manager has a problem
  • B. The I/O Modules in the chassis are the problem
  • C. The workstation you are using to connect to the KVM session is the problem
  • D. The Fabric Interconnect to which you are connected has a problem

Answer: C

 

NEW QUESTION 20
A Hard Drive (HDD) has been hot swapped in a UCS server blade, however, the UCS Manager GUI is not displaying updated metrics about the replacement drive. What action will be required to properly display updated metrics?

  • A. Remove and re-insert the server blade HDD controller mezzanine card
  • B. Use the CLI, since HDD metrics cannot be displayed with the UCS Manager GUI
  • C. Reboot the server.
  • D. Reboot the Fabric Interconnects

Answer: A

 

NEW QUESTION 21
Which statement is true regarding the UCS Manager GUI is showing "Overall Status Unassociated" in the General tab for a C-series server?

  • A. The server has a service profile assigned, but has connectivity issues with UCS Manager
  • B. The server has been properly connected, but has not been discovered by UCS Manager
  • C. The server is not properly connected
  • D. The server does not have a service profile assigned, but has been discovered by UCS Manager

Answer: C

 

NEW QUESTION 22
What are three possible causes of service profile association failure due to iSCSI configuration issue? (Choose three )

  • A. Misconfigured LUN. LUN masking
  • B. iSCSI Target out of configured range of services
  • C. Misconfigured iSCSI parameters
  • D. Improperly assigned iSCSI Class of Service
  • E. Inappropriate network configuration
  • F. Wrong WWNN

Answer: B,C,E

 

NEW QUESTION 23
Which two components are required when the integration of Cisco UCS C-series servers within a Cisco UCS Manager Direct Connect mode? (Choose two )

  • A. Compatible Cisco Nexus Fabric Extenders
  • B. Cisco Management Controller
  • C. Compatible UCS VIC adapter installed via the server's PCIe or MLOM slot
  • D. Compatible Cisco UCS Manager version
  • E. Compatible UCS 6200 or 6300 Fabric Interconnects

Answer: C,E

 

NEW QUESTION 24
Which two statements describes connecting the IO Modules in the UCS chassis to the Fabric interconnects? (Choose two )

  • A. Connect Fl-B to the IOM A of each chassis
  • B. Connect Fl-A to the IOM A of each chassis
  • C. Connect Fl-B to IOM A and IOM B in each chassis
  • D. Connect Fl-B to the IOM B of each chassis
  • E. Connect Fl-A to IOM A and IOM B in each chassis
  • F. Connect Fl-A to the IOM B of each chassis

Answer: B,D,F

 

NEW QUESTION 25
Which are two benefits of integrating Cisco UCS C-series servers with Cisco UCS Manager? (Choose two ) Cisco UCS Manager provides the ability to automatically update C-series firmware and device drivers from a single global interface.

  • A. Cisco UCS Manager uses service profiles and resource pools to allow the deployment of multiple servers with a single common template
  • B. Cisco UCS Manager is able to act as a common centralized management platform for both blade and rack servers in a single domain.
  • C. Cisco UCS Manager can automatically power on and off servers to scale elastically according to application performance demands
  • D. Cisco UCS Manager provides the ability to manage C-series in multiple physical domains from a single global interface

Answer: B

 

NEW QUESTION 26
After installing a new UCS M4 server, which two Cisco Integrated Management Controller connectivity options do you have? (Choose two )

  • A. In-band Access
  • B. Out-of-Band Access
  • C. Web Access
  • D. SNMP
  • E. XML API Access

Answer: A,E

 

NEW QUESTION 27
Which Cisco UCS internal component maintains the UCS XML database, manages the FSM stages and operations and instructs the Application Gateway to perform operations on physical and logical elements?

  • A. Cisco Finite State Machine
  • B. Cisco Data Management Engine
  • C. Cisco Application Gateways
  • D. Cisco UCS Manager

Answer: B

Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/System-Monitoring/3-1/b_UCSM_GUI_System_Monitoring_Guide_3_1/b_UCSM_GUI_System_Monitoring_Guide_3_1_chapter_0100.html

 

NEW QUESTION 28
......


Cisco 500-920 Exam Syllabus Topics:

TopicDetails
Topic 1
  • Troubleshoot storage area networks, including Fibre Channel, FCoE, zoning, NPV, and NPIV
Topic 2
  • Troubleshoot FEX
Topic 3
  • Troubleshoot virtualization solutions
Topic 4
  • Troubleshoot data center unified computing

 

Cisco 500-920 Test Engine PDF - All Free Dumps: https://www.itpass4sure.com/500-920-practice-exam.html