2025 Valid D-PEMX-DY-23 FREE EXAM DUMPS QUESTIONS & ANSWERS
Free D-PEMX-DY-23 Exam Braindumps EMC Pratice Exam
NEW QUESTION # 37
A system administrator must carry out a SupportAssist log collection on an MX750c sled using iDRAC that includes operating system logs.
What is required?
- A. iDRAC LOM NIC
- B. OpenManage System Administrator
- C. Enterprise License
- D. iDRAC Service Module Driver installed
Answer: D
NEW QUESTION # 38
Which component on the PowerEdge MX7000 uses a hot-plug serviceability model?
- A. Compute Sled
- B. Left Control Panel
- C. Main Distribution Board
- D. Rear Fan Board
Answer: A
NEW QUESTION # 39
A customer wants to change the switch operating mode from SmartFabric mode to Full Switch mode.
After deleting the fabric in OME-M, what configuration is retained on the switch?
- A. admin password, hostname, management IP Address, and all port breakout configuration
- B. admin password, hostname, and management IP Address
- C. admin password, hostname, management IP Address, and the VLT domain configuration
- D. admin password, hostname, management IP Address, and the VLAN database
Answer: B
NEW QUESTION # 40
Which MX7000 component is responsible for Fabric Consistency Check?
- A. Lifecycle Controller
- B. Management Module
- C. iDRAC
- D. Fabric Switching Engine
Answer: B
NEW QUESTION # 41
Which section of the PowerEdge MX7000 chassis provides a structure for mounting PSUs and sleds?
- A. Management Module slot
- B. Main Chassis
- C. Rear Tub
- D. Main Distribution Board
Answer: B
NEW QUESTION # 42
Which uplink configuration combination of the Top of the Rack Switch and the MX7000 Management Module is supported?
- A. 100 Mbps (Auto negotiation ON) and Auto negotiation OFF
- B. 100 Mbps (Auto negotiation OFF) and Auto negotiation OFF
- C. 100 Mbps (Auto negotiation OFF) and Auto negotiation ON
Answer: B
NEW QUESTION # 43
What is the port configuration of the MX9116n FSE?
- A. 32 internal 25 GbE server facing ports
10 QSFP28-DD ports
4 100 GbE QSFP28 uplink ports
2 100 GbE QSFP28 unified ports - B. 32 internal 25 GbE server facing ports
12 QSFP28-DD ports
2 100 GbE QSFP28 uplink ports
2 100 GbE QSFP28 unified ports - C. 16 internal 25 GbE server facing ports
10 QSFP28-DD ports
4 100 GbE QSFP28 uplink ports
2 100 GbE QSFP28 unified ports - D. 16 internal 25 GbE server facing ports
12 QSFP28-DD ports
2 100 GbE QSFP28 uplink ports
2 100 GbE QSFP28 unified ports
Answer: D
NEW QUESTION # 44
How are double-width compute sleds on the MX7000 numbered from the front?
- A. From 1 to 8, top to bottom
- B. As 1, 3, 5, and 7, top to bottom
- C. As 1, 3, 5, and 7 left to right
- D. From 1 to 8, left to right
Answer: C
NEW QUESTION # 45
The iSM is available under which license(s)?
- A. iDRAC Enterprise only
- B. iDRAC Express and iDRAC Enterprise
- C. iDRAC Express only
- D. OpenManage Enterprise-Modular
Answer: B
NEW QUESTION # 46
What is a valid option when resetting iDRAC to factory defaults?
- A. Preserve network and storage settings
- B. Preserve user and network settings
- C. Preserve storage and user settings
- D. Preserve identity and network settings
Answer: B
NEW QUESTION # 47
When performing "A1 the Box" management, what must be done to successfully connect to the Management Module?
- A. Connect cables to the KVM
- B. Change the baud rate to 128000
- C. Configure PuTTY for a serial connection
- D. Attach standard A-to-A USB cable to a laptop
Answer: C
NEW QUESTION # 48
A new administrator has just taken over an MX7000 Multi-Chassis Management Group and two-racks of PowerEdge servers. The previous administrator no longer works at the company and is not available.
No one knows the password for the OME-M interface and the default password is not working.
What must be used to reset the password?
- A. Management Module jumpers
- B. iDRAC for one of the compute sleds.
- C. Left ear control panel.
- D. RACADM using a serial connection
Answer: A
NEW QUESTION # 49
A server administrator wants to configure chassis power, thermal, and fans metric reports on a PowerEdge MX7000 chassis.
Which type of license is required?
- A. OME-M Advanced
- B. OME Essentials
- C. OME Enterprise
- D. OME-M Base
Answer: A
NEW QUESTION # 50
Which ports will be active in an MX9116n FSE if there are dual-port NICs in all the server sleds?
- A. server-facing ports 9-16
- B. even-numbered server-facing ports
- C. odd-numbered server-facing ports
- D. server-facing ports 1-8
Answer: C
NEW QUESTION # 51
What feature does OME-M v1.3 provide when replacing the Right Control Panel?
- A. MCM configuration must be reconfigured.
- B. Chassis configuration is maintained.
- C. MCM configuration can be backed up in the cloud.
- D. Chassis configuration must be reconfigured.
Answer: B
NEW QUESTION # 52
Refer to the exhibit.
A customer recently replaced all the dual-port network cards in mezzanine A with quad-port network cards across all 16 PowerEdge MX740c sleds in the two-chassis configuration. The customer can only access half of the network ports, even though the quad-port cards are visible in the iDRAC.
What actions are required to resolve the problem?
- A. Do a virtual reseat of all the MX740c sleds.
Update the firmware on all the quad port network cards.
Adjust the switch configuration to use the new ports. - B. Install a new 200G cable from port 3 on the MX7116n in chassis 2 slot A1 into port 19 on the MX9116n in chassis 1 slot A1.
Do the same for the switches in slots A2.
Adjust the switch configuration to use the new ports. - C. Reseat all the switches.
Adjust the switch configuration to use the new ports. - D. Reboot the switches.
Adjust the switch configuration to use the new ports.
Answer: B
NEW QUESTION # 53
A technician is doing an initial MX7000 setup and wants to use KVM to configure the MM. KVM is not working.
What are the two causes of this issue?
(Select 2)
- A. Mouse is not connected.
- B. DP-to-DVI and DP-to-HDMI adapters are not supported.
- C. MM is going through a reset.
- D. The resolution set on MM is too high.
Answer: B,C
NEW QUESTION # 54
......
Prepare For Realistic D-PEMX-DY-23 Dumps PDF - 100% Passing Guarantee: https://www.itpass4sure.com/D-PEMX-DY-23-practice-exam.html
Practice Test for D-PEMX-DY-23 Certification Real 2025 Mock Exam: https://drive.google.com/open?id=11CN5Rv93EDKKpGhLQF2cG4TdoEQBGzVj
