(2023) PASS HPE6-A80 exam with HP HPE6-A80 Real Exam Questions [Q16-Q40]

Share

(2023) PASS HPE6-A80 exam with HP HPE6-A80 Real Exam Questions

Real exam questions are provided for Aruba Certified Design Expert (ACDX) tests, which can make sure you 100% pass


HP HPE6-A80 (Aruba Certified Design Expert Written) certification exam is a challenging and rewarding certification that is designed for experienced network architects and designers who wish to demonstrate their expertise in designing and deploying complex networks using Aruba technologies. By achieving this certification, candidates can enhance their career prospects and demonstrate their value to employers who are looking for skilled IT professionals.

 

NEW QUESTION # 16
Refer to the exhibit.

This warehouse has the dimensions shown in the exhibit. The warehouse is 20 feet (6 m) high up to a steel railing on the celling. The shelves are about 16 feet (5m) high, and they hold large containers filled with fluid and metal equipment.
The customer needs consistent wireless coverage throughout the warehouse, mostly to support the tablets that employees use to run Inventory tracking and other applications. The warehouse staff works in shifts of 20.
The architect has selected AP-515S. About how many APs should the architect propose?

  • A. about 13-16
  • B. about 6-4
  • C. about 23-32
  • D. about 6-8

Answer: D


NEW QUESTION # 17
A retailer currently has two redundant ClearPass C2000 0L36O Gen9 hardware appliances and two perpetual 1K Access licenses. The customer uses ClearPass to authenticate employee wireless devices and other corporate wireless devices. ClearPass togs indicate that, peak license usage is currently 1900.
The customer now wants to add a guest access solution. Guests will connect to an open SSiD and be redirected to a portal which they can use to self-register and log in. The customer anticipates that up to f 550 guest devices will connect at the same time.
The customer requires the most cost-effective solution that will meet the requirements. What should the network architect recommend for this solution?

  • A. IK + 500 Access licenses: IK + 500 Guest licenses
  • B. 1K + 500 Access licenses; Two 1K Onboard licenses
  • C. 1K + 500 Access licenses
  • D. Two 1K Guest licenses

Answer: D


NEW QUESTION # 18
Refer to the exhibit.

The network architect has created the 60M shown in the exhibit tor a complete new wired ana wireless solution for a customer. This solution the customer wants to discover and manage every component or the network in Airwave, including twins, MCS, APS, and switches.
How many AirWave licenses dees the architect need to add?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: D


NEW QUESTION # 19
A customer has critical wired endpoints. However, each endpoint has a single Ethernet connection to the network. The customer wants redundancy in the switch access layer to minimize the chances that an endpoint will lose this connection The architect plans to deploy two Aruba CX 6405 switches in the closet.
Which plan provides the greatest redundancy for this scenario?

  • A. The 6405 switches are not in a vsF fabric, and have redundant power supplies but not redundant management modules.
  • B. The 6405 switches are in a VSX fabric, and each has a redundant management module but not a redundant power supply.
  • C. The 6405 Switches are in a VSF fabric, so the individual switches do not need redundant components.
  • D. The 6405 switches are not in a VSX fabric, and have redundant power supplies and redundant management modules.

Answer: B


NEW QUESTION # 20
What is one piece of additional information architects should obtain from the customer before they design the wireless solution?

  • A. the average number of users per loT device
  • B. the power requirements for the wireless loT devices and security cameras
  • C. the authentication and encryption capabilities for loT devices and security cameras
  • D. the distance between the locations where cameras will be installed and the wiring closet on each floor

Answer: D


NEW QUESTION # 21
A customer has an existing; Aruba wireless solution to provide wireless access for employees. The solution Includes Aps, mobility controllers (MCs) at the network core, and a Mobility Master (MM} A customer would like to set up a separatelymanaged guest network and have the traffic go directly to the DMZ.
What should the architect suggest as the simplest solution that meets the requirements?

  • A. Use MulitZone, and put a mobility controller in Itie DMZ.
  • B. Have a dedicated mobility controller in the DMZ managed by the same MM
  • C. Add APs in a dedicated AP group to support only the guest network SSID.
  • D. Double the number of APs and controllers.

Answer: A


NEW QUESTION # 22
A company has several remote sues that operate more or less autonomously. Each site has ns own local services and Internet connection However the company does have a main office with a few centralized resources that the company would like to make available to remote office employees over the Internet connection. Sites range in size and require between 10 and 20 APs.
The customer requires the most cost-effective solution that meets the requirements.
Which solution should the architect recommend for each remote site?

  • A. Campus APs (CAPS) with CPSec control channels to a main office MC
  • B. an IAP cluster with an IPsec tunnel to a main office MC
  • C. Remote APs (RAPs) with IPsec tunnels to a main office MC
  • D. Campus APs (CAPs) with a local MC that has an SD-WAN license

Answer: D


NEW QUESTION # 23
Refer to the exhibit.

Exhibit: A49.01114316-102
The architect has determined that this building requires two 10GPE links to the data center.
What is the correct transceiver type for the links?

  • A. SFP+ LRM
  • B. SFP+ SR
  • C. 3FP+ LRM with mode conditioning
  • D. SFP+ LR

Answer: A


NEW QUESTION # 24
Refer to the exhibit.

A stadium wants to deploy location-based services, including blue-dot wayfinding over a 200.000 square root (isr580 sq. m) are a. The custom past particular areas. The customer has selected a 1 year subscription.
The exhibit shows the BOM that the architect created in iris.
Which correction should the architect make?

  • A. Add another campaign subscription.
  • B. Change the campaign subscription to a Maps subscription.
  • C. Add two Maps subscriptions.
  • D. Remove one Blue Dot Nav subscription.

Answer: B


NEW QUESTION # 25
A customer has a large network, which includes a main site and many branch sites. The network has a total of about 10.000 wireless devices at the main site and 15,000 wireless devices total at branches.
To fulfill the requirements for a wireless network upgrade, the architect plans to propose;
* 2 7205 MCs at the main site
* 2 7210 MCs at the main site
* 10 7030 MCs at branch sites
* 200 RAPs at branch sites
* 500 CAPS at the main site
* 300 CAPS at branch sites
What is the most cost-effective Mobility Master solution that meets the requirements'?

  • A. MM-HW-5K appliance + MM-HW-5k appliance
  • B. MM-HW-5K appliance
  • C. MM-HW-1K appliance
  • D. MM-HW-1OK appliance

Answer: A


NEW QUESTION # 26
Refer to exhibit.

A customer has a building that needs a switch upgrade. The customer would like at least 20Gbps for the uplink bandwidth out of each closet. The building wiring plan is shown in Exhibit i. The customer will not consider any cabling upgrades at this point. The current proposal is shown in Exhibit 2.
Which correction must the architect make to the proposal to meet the customer requirements?

  • A. Add an aggregation layer, and connect wiring closet switches to the aggregation layer with SFP+- SR transceivers
  • B. Add an aggregation layer, and connect wiring closet switches to the aggregation layer on Smart Rate pons.
  • C. Change the SR transceivers tor each link between the wiring closet switches and me network core to LRM transceivers
  • D. Add a mode conditioning cable for each link between the wiring closet switches and the network core.

Answer: D


NEW QUESTION # 27
A retailer wants to add a wireless network to its stores to provide guest access. The store has wired POS systems which the customer will now replace with wireless systems.
What is one Important security action that the wireless solution supports to comply with PCI DSS?

  • A. Enforce role-based access control on administrators who access controllers
  • B. Impose mandatory clean up periods to delete records of user access to controllers
  • C. Implement TKIP encryption on the wireless network used by POS devices.
  • D. Use test-practice, factory default settings for security settings and login credentials.

Answer: D


NEW QUESTION # 28
in which scenario do Aruba CX 6400 Series switches, but not Aruba 6300M Series switches, meet the needs Tor a wired upgrade?

  • A. The customer requires each access layer switch to support at least 25Gbps on its fiber uplinks at all times; including if up to one uplink tails.
  • B. The customer requires enhanced redundancy at the access layer and wants to ensure that each switch can continue to operate even if a power supply fails
  • C. The customer has recently deployed Aruba AP-535 APs and is concerned about a future-proof wired edge that will continue to support expanding bandwidth requirements.
  • D. The customer requires switches in the same closet to operate together as a single switch for Link Aggregation but to be managed as separate devices.

Answer: D


NEW QUESTION # 29
The architect plans to recommend an upgrade to Aruba CX switches
What is one requirement for the new solution that justifies this recommendation?

  • A. the requirement to support secure IPsec tunneling at the aggregation layer
  • B. the requirement to support larger ARP tables at the aggregation layer
  • C. the requirement to support tunneled-node at the access layer
  • D. the requirement to support smart Rate at the access layer

Answer: A


NEW QUESTION # 30
What is one customer requirement that can drive the need for a relatively dense AP deployment. In which ire coverage areas of at least three AP radios overlap?

  • A. AP operation as hybrid AMs for IDS/WIPS
  • B. support for beacon management
  • C. the deployment of dual SGHz radio APs
  • D. location tracking of wireless loT devices

Answer: B


NEW QUESTION # 31
An indoor basKetbaiI stadium has 5.000 seats in two rings:
* The stadium has a ceiling height of GO feet (18 m).
* There is a catwalk around the perimeter of the basketball court, between the court and the seating areas.
* This catwalk is 40 feet (12 m) from the floor.
* There are two scoreboards at either end of the stadium.
* The construction of the stadium is concrete and sleet.
The customer does not want an under-seat, picoceli deployment.
Which AP model is appropriate to provide coverage in the main stadium bawl?

  • A. AP-575
  • B. AP-555
  • C. AP-577
  • D. AP-505

Answer: C


NEW QUESTION # 32
Refer to the exhibit.


A customer needs to support resilient wireless services
What is one way that this design helps to minimize me impact of a railed access layer switch on these services?

  • A. APS in the same area connect to different switches.
  • B. The 8400s and G405s use Virtual Switching Extension (VSX) in cone and access.
  • C. The switches support Smart Rate and dual home AP connections.
  • D. Each access layer switch has two redundant links to the core.

Answer: C


NEW QUESTION # 33
A retailer wants to add a wireless network to its stores to provide guest access. The store has wired POS systems which the customer will now replace with wireless systems.
The APs will he installed on the ceilings, which are about S feel (2.4 m) high.
What is one feature on the APs that can help the customer comply with PCI DSS?

  • A. Anomaly-based threat detection
  • B. User and Entity Behavior Analytics (UEBA)
  • C. Physical security with Kensington Security Slots
  • D. Smart Rate ports

Answer: D


NEW QUESTION # 34
Refer to the exhibit.

The exhibit shows the current AP deployment In a warehouse that stores frozen food goods:
* APs are mounted on the ceiling, which is 15 feet (4.6 m) high.
* Shelves are 12 feet (3.7 m) high and are typically fully stocked.
This customer indicates that their current wireless performance is inadequate.
What should the network architect include in the new solution to resolve this issue?

  • A. APs deployed with directional antennas on the ceiling, due to the high 15-foot callings
  • B. APs deployed on the ceiling in each aisle, due to the high absorption between aisles
  • C. APs deployed with directional antennas and a hybrid wall-mount, ceiling-mount design
  • D. APS deployed on the ceiling in the same current locations, out with dual 5GHz radios

Answer: B


NEW QUESTION # 35
Refer to the exhibit.

A customer requires a core switching solution for a very large multi-building campus with about 30;ooo wireless clients and devices. The network will have a flat topology as shown in the exhibit, and MCs will forward all wireless traffic to the core for routing.
The customer had considered Aruba 5400R Series switches, but the architect recommends Aruba S320 switches Instead.
How should the architect justify this recommendation?

  • A. The 8320 switches are required to eliminate the aggregation layer as the customer desires.
  • B. The 3320 switches offer more extensive mobility integration features with Aruba MCs and APs than the 54C0R Series switches do.
  • C. The 8320 switches have greater performance and larger ARP tables than the 54Q0R Series, as is necessary for a network this size.
  • D. The 3320 switches support a higher density of 10GbE fiber ports than the 5400R Series.

Answer: B


NEW QUESTION # 36
A company already has an Aruba wireless network The network currently consists of:
* oneMM-HW-1k
* two 7210 MCs in the network core
* two 721GMCsintheDMZ
* 200 AP-515S in Building 1 and Building 5
100 AP-515S each In Building 2r Building 3, and Building 4
The customer now wants to assess if it needs local Mobility controllers (MC) for any buildings:
- Building 1 is the main office building for the campus. It supports the highest number of APs. It connects to the network core without an aggregation layer.
* Building 2 is further away from the Building i. and no roaming is provided between it and the other buildings its access layer connects to the network cone with a pair of Aruba CX 6300M aggregation switches.
* Building 3 is further away from the other buildings, it connects to the network core without an aggregation layer.
The Guest SSID traffic should be tunnelled to the DMZ controllers
' Building 4 has its own local datacenter and Internet connection. The company would like it to be able to operate completely autonomously if its aggregation layer loses connectivity with the core.
* Building 5 is further away from the other buildings, it connects to the network core without an aggregation layer.
This building has been assigned to a partner that would like to manage a dedicated SS1D using the shared AP infrastructure.
In which two buildings should the network architect plan local mobility controllers (MCs)? (Select two)

  • A. Building 4
  • B. Building 1
  • C. Building 2
  • D. Building 5
  • E. Building 3

Answer: B,E


NEW QUESTION # 37
Refer to the exhibit.

A customer needs to create a proposal for a full wireless solution for a customer The customer has indicated that the MCs will connect to Aru&a CX Switches at the core and the APs will connect to PoE-i- switches at the edge. The customer requires that the wireless solution support at least 50 Mbps concurrently per AP. The architect has created a BOM tor a Mobility Master (MM), two MC 721os, and 400 AP-535S. me exhibit snows this BOM.
Which components has the architect forgotten?

  • A. Mounting Kits tor the MOs and MM
  • B. Smart Rate PoE+ injectors for the APs
  • C. SFP+ transceivers tor the MC connections
  • D. Sufficient Enterprise licenses for the APs on both MCs

Answer: A


NEW QUESTION # 38
Refer to the exhibit.

The exhibit shows the current AP deployment in a school. This customer indicates that the current wireless performance is inadequate and w B02.11ax.
For the new' solution, what should the network architect recommend?

  • A. APs deployed in rooms with a density-based design
  • B. APs deployed in hallways with about twice the density
  • C. APS deployed in similar locations, but with higher gain antennas
  • D. APs deployed in similar locations, but with dual 5 GHz radios

Answer: B


NEW QUESTION # 39
An archinect needs lo plan a Mobility Master (MM) solution for a customer Requirements include:
* redundancy for the MM
* redundancy for the MCS (seamless failover if up to one fails)
The wireless network consists of
* total APs - 300
* total wireless devices = 20,000
* total MCs = 10
The customer wants the most cost-effective plan that meets me requirements.
Which plan for MMs should the architect select?

  • A. 1 MM-HW-5K and 1 MM-HW-1K
  • B. 2 MM-HW-5K
  • C. 2 MM-HW-1QK
  • D. 1 MM-HW-5K and 1 MM-VA-1K

Answer: C


NEW QUESTION # 40
......


HP HPE6-A80 certification exam covers a wide range of topics including the design and deployment of Aruba wireless networks, network architecture and topology, network security and access control, network management and troubleshooting, and best practices for wireless network design and deployment. HPE6-A80 exam also covers the latest industry standards and regulations related to wireless networks.

 

Latest HPE6-A80 Pass Guaranteed Exam Dumps Certification Sample Questions: https://www.itpass4sure.com/HPE6-A80-practice-exam.html