100% Pass Guaranteed Accurate JN0-636 Answers 365 Days Free Updates
JN0-636 DUMPS Q&As with Explanations Verified & Correct Answers
NEW QUESTION # 61
You are asked to allocate security profile resources to the interconnect logical system for it to work properly.
In this scenario, which statement is correct?
- A. The resources must be calculated based on the amount of traffic that will flow between the logical systems.
- B. The NAT resources must be defined in the security profile for the interconnect logical system.
- C. No resources are needed to be allocated to the interconnect logical system.
- D. The flow-session resource must be defined in the security profile for the interconnect logical system.
Answer: A
NEW QUESTION # 62
You have configured the SRX Series device to switch packets for multiple directly connected hosts that are within the same broadcast domain. However, the traffic between two hosts in the same broadcast domain are not matching any security policies.
Referring to the exhibit, what should you do to solve this problem?
- A. You must change the global mode to transparent bridge mode.
- B. You must change the global mode to security switching mode.
- C. You must change the global mode to security bridging mode
- D. You must change the global mode to switching mode.
Answer: C
NEW QUESTION # 63
You opened a support ticket with JTAC for your Juniper ATP appliance. JTAC asks you to set up access to the device using the reverse SSH connection.Which three setting must be configured to satisfy this request? (Choose three.)
- A. Enable remote support.
- B. Create a temporary admin account.
- C. Create a temporary root account.
- D. Enable a JATP support account.
- E. Enable JTAC remote access
Answer: A,B,D
Explanation:
https://kb.juniper.net/InfoCenter/index?page=content&id=TN326&cat=&actp=LIST&showDraft=false
NEW QUESTION # 64
You want to use selective stateless packet-based forwarding based on the source address. In this scenario, which command will allow traffic to bypass the SRX Series device flow daemon?
- A. set firewall family inet filter bypass_flowd term t1 then routing-instance stateless
- B. set firewall family inet filter bypass__f lowd term t1 then packet--mode
- C. set firewall family inet filter bypaa3_flowd term t1 then skip--services accept
- D. set firewall family inet filter bypas3_flowd term t1 then virtual-channel stateless
Answer: C
NEW QUESTION # 65
Exhibit
Referring to the exhibit, which statement is true?
- A. This custom block list feed cannot be saved if the Juniper Seclntel block list feed is configured.
- B. This custom block list feed will be used after the Juniper Seclntel block list feed.
- C. This custom block list feed will be used instead of the Juniper Seclntel block list feed
- D. This custom block list feed will be used before the Juniper Seclntel
Answer: B
NEW QUESTION # 66
You must ensure that your Layer 2 traffic is secured on your SRX Series device in transparent mode.
What must be considered when accomplishing this task?
- A. Security policies are not supported when operating in transparent mode.
- B. You must reboot your device after configuring transparent mode.
- C. Layer 2 interfaces must use theethernet-switchingprotocol family.
- D. Screens are not supported in your security zones with transparent mode.
Answer: B
NEW QUESTION # 67
Which two types of source NAT translations are supported in this scenario? (Choose two.)
- A. translation of one IPv6 subnet to another IPv6 subnet with port address translation
- B. translation of IPv4 hosts to IPv6 hosts with or without port address translation
- C. translation of one IPv6 subnet to another IPv6 subnet without port address translation
- D. translation of one IPv4 subnet to one IPv6 subnet with port address translation
Answer: A,B
NEW QUESTION # 68
You are asked to deploy filter-based forwarding on your SRX Series device for incoming traffic sourced from the 10.10.100.0/24 network.
In this scenario, which three statements are correct? (Choose three.)
- A. You must create a forwarding-type routing instance.
- B. You must create a RIB group that adds interface routes to your routing instance.
- C. You must create and apply a firewall filter that matches on the destination address 10.10.100.0/24 and then sends this traffic to your routing instance.
- D. You must create and apply a firewall filter that matches on the source address 10.10.100.0/24 and then sends this traffic to your routing
- E. You must create a VRF-type routing instance.
Answer: C,D,E
NEW QUESTION # 69
Which two statements are correct about the output shown in the exhibit? (Choose two.)
- A. The packet matches a user-configured policy
- B. The packet is an SSH packet
- C. The source address is translated.
- D. The destination address is translated.
Answer: B,C
NEW QUESTION # 70
Your organization has multiple Active Directory domain to control user access. You must ensure that security polices are passing traffic based upon the user's access rights.
What would you use to assist your SRX series devices to accomplish this task?
- A. JATP Appliance
- B. JSA
- C. JIMS
- D. Junos Space
Answer: C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-user-auth-configure-jims.html
NEW QUESTION # 71
Click the Exhibit button.
Referring to the exhibit, which statement is true?
- A. MACsec is securing data across the control interface
- B. SSH is securing data across the control interface
- C. IPsec is securing data across the control interface
- D. ARP security is securing data across the control interface
Answer: A
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/reference/command-summary/show- chassis-cluster-interfaces.html
NEW QUESTION # 72
Exhibit
Referring to the exhibit, a spoke member of an ADVPN is not functioning correctly.
Which two commands will solve this problem? (Choose two.)
A)
B)
C)
D)
- A. Option A
- B. Option B
- C. Option C
- D. Option D
Answer: C
NEW QUESTION # 73
A local user complains that they cannot connect to an FTP server on the DMZ network.
You investigate and confirm that the security policy allows FTP traffic from the trust zone to the DMZ zone.
What are two reasons for this problem? (Choose two.)
- A. No security policy exists for traffic from the DMZ zone to the trust zone.
- B. The FTP ALG is disabled.
- C. No route is configured to the DMZ network.
- D. The FTP server has no route back to the local network.
Answer: B,D
NEW QUESTION # 74
When would you use the port-overloading-factor 1 setting?
- A. to disable the port-overloading
- B. to map ports with 1:1 ratio for port-overloading
- C. to enable the port-overloading
- D. to set the maximum port-overloading capacity to 65,536
Answer: A
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/reference/configuration- statement/security-edit-port-overloading-interface-source-nat.html
NEW QUESTION # 75
You are asked to detect domain generation algorithms
Which two steps will accomplish this goal on an SRX Series firewall? (Choose two.)
- A. Attach the security-metadata-streaming policy to a security
- B. Define a security-metadata-streaming policy under [edit
- C. Define an advanced-anti-malware policy under [edit services].
- D. Attach the advanced-anti-malware policy to a security policy.
Answer: C,D
NEW QUESTION # 76
Which two statements are correct regarding tenant systems on SRX Series devices? (Choose two.)
- A. A maximum of 32 tenant systems can be configured on a physical SRX device.
- B. A maximum of 500 tenant systems can be configured on a physical SRX device.
- C. All tenant systems share a single routing protocol process.
- D. Each tenant system runs its own instance of the routing protocol process
Answer: A,D
NEW QUESTION # 77
Exhibit
You are validating bidirectional traffic flows through your IPsec tunnel. The 4546 session represents traffic being sourced from the remote end of the IPsec tunnel. The 4547 session represents traffic that is sourced from the local network destined to the remote network.
Which statement is correct regarding the output shown in the exhibit?
- A. The remote gateway address for the IPsec tunnel is 10.20.20.2
- B. NAT is being used to change the source address of outgoing packets
- C. The local gateway address for the IPsec tunnel is 10.20.20.2
- D. The session information indicates that the IPsec tunnel has not been established
Answer: A
NEW QUESTION # 78
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The data that traverses the ge-070/0 interface cannot be intercepted and read by anyone.
- B. The data that traverses the ge-070/0 interface can be intercepted and read by anyone.
- C. The data that traverses the ge-O/0/0 interface is secured by a connectivity association key.
- D. The data that traverses the ge-0/070 interface is secured by a secure association key.
Answer: A,B
NEW QUESTION # 79
Referring to the exhibit. You configure a traceoptions file called radius on your returns the output shown in the exhibit. What is the source of the problem?
- A. The RADIUS server IP address is unreachable.
- B. An incorrect password is being used.
- C. The RADIUS server suffered a hardware failure.
- D. The authentication order is misconfigured.
Answer: C
NEW QUESTION # 80
......
JN0-636 dumps Exam Material with 140 Questions: https://www.itpass4sure.com/JN0-636-practice-exam.html
JN0-636 Questions and Answers Guarantee you Oass the Test Easily: https://drive.google.com/open?id=1q2kgeXb2jdsALzcMj5HosBKBqYfn3xG1
