100% Free 300-615 Exam Dumps Use Real CCNP Data Center Dumps With 99 Questions!
Pass Your 300-615 Exam Easily With 100% Exam Passing Guarantee [2021]
NEW QUESTION 34
Refer to the Exhibit.
An Engineer cannot log in to the Cisco IMC page of the Cisco UCS C220 server. Which action resolve the issue?
- A. Replace the self-signed certificate that is installed on the Cisco IMC with a user certificate that is signed from the client corporate certificate.
- B. Replace the self-signed certificate that is installed on the Cisco IMC with a server certificate that is signed from the client corporate certificate.
- C. Se the FQDN of the Cisco IMC webpage login page instead of the IP address for the connection to be secure.
- D. Use the DNS of the Cisco IMC webpage login page instead of the IP address for the connection to be secure.
Answer: B
NEW QUESTION 35
Refer to the exhibit.
Partial configuration from N9K-1 and N9K-2 is included. The client has two WANs connected.
* WAN-1 is for normal business-day activities.
* WAN-2 is for server backups during nonworking hours of 1:00 a.m. to 5:00 a.m. daily.
The client says that at the scheduled time for backup, the data center server failed to use the WAN-2 link to back up the servers to the cloud backup system. What is the solution to this problem?
- A. The Cron entry must be configured without double quotes.
- B. The applet called "Backup" must include an action to remove the current static route.
- C. The event timer must be written in epoch time format.
- D. The Cisco Nexus switch must be configured with one applet because a configuration with two applets will fail.
Answer: B
NEW QUESTION 36
An engineer discovers that an NPV/NPIV uplink experiences a heavy load and plans to add more uplinks.
What occurs when the new uplinks are added to the uplink?
- A. All connections must be reset before the new uplinks are used.
- B. New and existing connections automatically use the new uplinks.
- C. Only new connections automatically use the new uplinks.
- D. Paths must be defined before new connections use the new uplinks.
Answer: B
Explanation:
Section: Storage Network
NEW QUESTION 37
A request to activate the port security database is rejected. Which action investigates the cause of the issue?
- A. Verify that devices are fully attached to the active database.
- B. Find conflicting entries between the active and configuration databases.
- C. Enable the auto-learning feature.
- D. Use the force option to identify rejected devices.
Answer: D
Explanation:
Section: Management and Operations
NEW QUESTION 38
Refer to the exhibit.
A network engineer has connected the Nexus switch management port to the Internet using DHCP to allow the Guest shell running on the switch to download Python packages. The engineer can ping google.com successfully from the Nexus switch, but the Guest shell failed to download any Python packages. Which action resolves the problem?
- A. Manually configure DNS in the Guest shell, even if it is claimed on the Cisco Nexus switch through DHCP.
- B. Manually configure NTP in the Guest shell.
- C. Update the Python packages on the Cisco Nexus switch directly.
- D. Connect Guest shell to data plane interfaces to be able to connect to the networks outside the Cisco Nexus switch.
Answer: A
NEW QUESTION 39
Refer to the exhibit.
The HSRP instance on both switches is showing as active. Which action resolves the issue?
- A. Allow VLAN 100 between the switches.
- B. Configure the HSRP timers to be the same.
- C. Configure preempt on only one of the switches.
- D. Configure the IP address of N9K-B on the same subnet as N9K-A.
Answer: A
NEW QUESTION 40
You have an ACI environment with three APICs, two spine switches, and four-leaf switches. You wipe and reboot all APICs first then leaf and spine switches one-by-one and successfully go through the Initial Setuo dialogue on the APIC 1 CIMC KVM console. When you log in to the APIC1 WebGUI, you notice that you do not see any directly connected leaf switches being discovered under Fabric > Inventory > Fabric Membership.
What is the cause of the issue?
- A. Rebooting the APICs and the leaf and spine switches after wiping them is not required.
- B. The same Fabric Name value should be used before after wiping all devices.
- C. The leaf nodes were not erased properly, which caused a fabric parameters mismatch with the APIC1.
- D. You forgot to enter the TEP Pool value during the Initial Setup dialogue on APIC1.
Answer: D
NEW QUESTION 41
A request to activate the port security database is rejected. Which action do you perform to investigate the cause of the issue?
- A. Verify that devices are fully attached to the active database.
- B. Find conflicting entries between the active and configuration databases.
- C. Enable the auto-learning feature.
- D. Use the force option to identify rejected devices.
Answer: D
NEW QUESTION 42
Refer to the exhibit.
A web browser displays a "not secure" warning message when accessing the web interface of Cisco UCS Manager. Which action resolves the issue?
- A. Use a supported web browser.
- B. Use a supported version of UCS Manager.
- C. Use the correct TCP port for HTTPS.
- D. Load third-party certificate to UCS Manager.
Answer: D
NEW QUESTION 43
Refer to the exhibit.
Partial configuration from N9K-1 and N9K-2 is included. The client has two WANs connected.
* WAN-1 is for normal business-day activities.
* WAN-2 is for server backups during nonworking hours of 1:00 a.m. to 5:00 a.m. daily.
The client says that at the scheduled time for backup, the data center server failed to use the WAN-2 link to back up the servers to the cloud backup system. What is the solution to this problem?
- A. The Cron entry must be configured without double quotes.
- B. The applet called "Backup" must include an action to remove the current static route.
- C. The event timer must be written in epoch time format.
- D. The Cisco Nexus switch must be configured with one applet because a configuration with two applets will fail.
Answer: B
NEW QUESTION 44
An engineer is troubleshooting issues in Cisco UCS Director. Drag and drop the possible causes from the left onto the correct issues on the right.
Answer:
Explanation:
NEW QUESTION 45
Drag and drop the Cisco UCS SNMP fault types from the left onto the correct issues on the right.
Answer:
Explanation:
NEW QUESTION 46
A firmware upgrade on a fabric interconnect fails. A bootflash contains a valid image. Drag and drop the recovery steps from the left onto the correct order on the right.
Answer:
Explanation:
NEW QUESTION 47
Refer to the exhibit.
HSRP adjacency fails to form between Nexus7K-1 and Nexus7K-2. Which action should be taken to solve the problem?
- A. Configure the same HSRP priority between the two switches.
- B. Configure HSRP version 2 on Nexus7K-2.
- C. Configure preempt on one of the switches in the HSRP group.
- D. Configure the correct subnet mask on Nexus7K-1.
Answer: B
NEW QUESTION 48
An engineer is troubleshooting issues in Cisco UCS Director. Drag and drop the possible causes from the left onto the correct issues on the right.
Answer:
Explanation:
NEW QUESTION 49
Refer to the exhibit.
When an engineer inserts 8-Gb FC SFP port 15 on a Cisco UCS Fabric Interconnect, the port fails. What is a possible cause of the issue?
- A. The polarity of the fiber cable is reversed.
- B. Port 15 is configured as an Ethernet port.
- C. Port 15 is missing a license.
- D. Port 15 is configured for 4-Gb FC.
Answer: D
NEW QUESTION 50
An engineer troubleshoots a packet flow from an access leaf to a spine. Which EVPN routes are expected on this connection?
- A. EVPN Type 0, 9, and 15
- B. EVPN Type 9-15
- C. EVPN Type 0 and 16
- D. EVPN Type 1-5
Answer: D
Explanation:
Section: Network
Explanation
NEW QUESTION 51
Your client reports that many flaps and server cluster disconnects occur in their data center. While troubleshooting the issue, you discover a network attack hitting their Cisco Nexus 7000 Series Switches and determine that the source IP addresses are spoofed. Which first-line security solution resolves this issue?
- A. Unicast RPF
- B. Storm Control
- C. IP Source Guard
- D. Dynamic ARP Inspection
Answer: D
NEW QUESTION 52
Refer to the exhibit.
The initiator that has FC ID 0x970102 fails to communicate with the target that has FC ID 0x970200. What action resolves the issue?
- A. Reconfigure the initiator and the target to be in the same zones.
- B. Reset the port for FC ID 0x970102 and FC ID 0x970200 to log in to the fabric.
- C. Reset the port for FC ID 0x970209 and FC ID 0x9700c2 to log in to the fabric.
- D. Reactivate the zoneset.
Answer: A
NEW QUESTION 53
......
Potential Candidates
Cisco CCNP Data Center is an excellent way to authenticate one’s skills and understanding of working with data center solutions, such as handling the processes of installation, design, and maintenance, among the rest. Thus, it is intended for the data center engineers, network designers, network engineers, and administrators who eager to take their competence up a notch. The interested candidates must go through one core exam and one concentration test (for example, 300-615 DCIT). The core exam focuses on the applicants’ general understanding of data center technologies, while the concentration ones are more specialized and industry-oriented. This means that the vendor recommends going for Cisco 300-615 after dealing with the core option. It will prove that you have a good foundation for the next step required in the certification process.
Study resources for the Valid 300-615 Braindumps: https://www.itpass4sure.com/300-615-practice-exam.html
300-615 Dumps are Available for Instant Access: https://drive.google.com/open?id=1cXJepYTpRk63dvpFNJeCRQMUn-HFIiS-
